Original VPI Aries vs VPI classic 3

Good move. Harry recently told me that an Aries 1, like we have, would today be 8k to retail. He said it is as good as the Avenger. I have Ultra 5s attached to the plinth and Ultra Minis attached to the motor pod. Plus a 12" 3D arm. After living with this setup for a while, I decided against a TT upgrade all together. Only place left to go is to a uber $$ table and I don't feel at all compelled to do so.

John

I have an original, but updated TNT. If you have an original Aries, you have the acrylic-lead-aluminum platter. I would not change it for the current aluminum platter in any form. IMO, and that of many others, what you have is superior. I have two or three suggestions to improve your TT's performance. My guess is that with the older platter, the VPI ring weight is not a possibility. I highly recommend a TTW ring weight and a center weight. Another thing I would do is that I would either describe (or send a photo of) your bearing to VPI and ask if they had a later one (possibly even used) that would offer superior performance. They have a lot of old stuff lying around and it would not cost very much. That could make a very nice difference. Finally, and this would very much depend upon your setup and room, you might consider a softer suspension, either the VPI mini-feet or a squash ball suspension like Ginko--though you can very easily make it yourself.

Aries is fine, I would look to replace the arm with a 3D mated with an upgraded cartridge. The 3D is much better than the 10.5..less hi fi sounding...smoother, yet more detailed with greater depth of field

Still working with my original Aries 1, albeit heavily modified. Classic platter (I ABed all the prior platters with it, and its my favorite by far), a Rim Drive, Outer Weight, Center Weight, Classic Feet, XLR inputs and 3D Arms. Pretty darn good to my ears. Holding pat.

I have a Superscoutmaster with Rim Drive, etc. like yours. Harry told me that there is nearly no difference between ours and the D/D. No point in focusing on the Direct Drive. One thing I could suggest....when I replaced the Classic Feet with BearPaws, it made a leap forward in sound.