Do wooden arms warp


I hate to sound stupid or pedantic, but I have historically done a lot of woodwork - turning/routering/bedmaking. The single biggest problem is locating wood that does not warp.
Wood cut and left to settle over 50 years continue to warp, likewise, even very old wood warps as well. In my experience when a piece is smaller/thinner it is more pronounced unless there is some lamination (not always a cure). I am yet to come across or find a treatment which stops warping. It would be nice if a manufacturer of such an arm chimes in on this thread, because arms such as: Durand, Shroder, Reed etc all have wood arms/options and they really are the most expensive arms out there.
lohanimal
The main advantage from a wood arm, you can hear the weather change before you can see it. And you know when your wife did open the window and did no telly you. But, we all know, there is a Fan out there for everything :-)
Before the Reed started their tonearm production they first
compared all kinds of different materials for the arm wand.
The conclusion was that wood is the best material for the
purpose (see: www.reed.lt ). I can't remember that Fletcher
ever stated: 'I made (a better) Breuer' ( aka 'The arm',
alias 'Sumiko 800'. Now that I at last got an decent
plinth for my SP-10 mk2 I don't need to tray again to
exachange whatever of my Glanz carts for the plinth made
by my friend Vetterone. He always refused for some reasons.
But now that he reproduces some (wooden)German tonearm
in the USA I may have a better chance?
Hey, I wasn't trying to slam wooden tonearms. I was just asking questions. I have no experience with them so I was curious about any downsides to wooden arms==== Tonywinsc

Now, you got your questions answered.
If you do not have a wood tonearm go and get one and stop worrying about micron warps which if you are old as I am, you will not notice it with your naked eyes.
Go listen to your turntable and enjoy the music.
Syntax is an audiophile who is widely experienced with top quality equipment, so I take his opinions seriously. If you read this, Syntax, can you comment on instances in which you or a close friend (if you have never owned a wood tonearm yourself) found problems with a wood tonearm due specifically to the effect of humidity? That would be helpful. My agnosticism regarding wood tonearms is based on my personal experiences with two very good ones that after a couple of years have caused no such problems in my system. Alignment remains stable within the accuracy afforded by Dertonearm's Uni-Protractor. The temperature in my listening room remains between 68 and 72 F, year round, and the humidity is controlled by air conditioning. Beyond that, I certainly do not hear a difference in sonics between winter and summer.
No, but my wooden leg does, causing me to often fall over on my way home from the tavern late on a winter's night. Or, at least that is what I told me captain......arg!