Basis Vector cartridge recommendations


Looking for some advice from the analog experts for a cartridge, running a Basis 2200 signature, Vector 4 tonearm with an Allnic 3000 phono stage, CJ Premier 14, Mac 501 amps and all Kubala- Sosna cabling. I have used an ortofon jubilee for 7 years or so and thinking about a change. short list:

Ortofon cadenza black - slightly concerned it might be too revealing with my Thiels and music preference - classic rock, blues, jazz.....

Ortofon bronze
Transfiguration Proteus
Lyra - never have moved me but limited experience

Any suggestions would be appreciated since auditions in my room are impossible. Thanks.
pops
Congrats Jerry! I hope that the new Proteus will bring you many years of joy!

That Basis, Transfiguration, Allnic combination must sound fantastic! Enjoy the music.

Cheers,
John
Thanks John, sounds really good as I know your front end does. This cartridge is very nice, so much finesse and dynamic when called upon - only 10 hours cooked on this bad boy.
I don't know which Thiels you have, but they are very good speakers and would benefit from a higher level of cartridge. I am using an Ortofon Windfield. Set it up well (use 1000 ohms) and be very happy.
Pops,

I like your choie in cartridges. I don't think there were many restrictions on your choices with the Vector arm; it would work with almost any low compliance cartridge and probably most medium compliance cartridges as well. Although Transfiguration cartridges have a low source impedance, which suggests they should be loaded down, I actually like them run with not much loading into my phonostage so do some experimenting (my Orpheus L is not that sensitive to loading).
Larryi thanks for the reply, I am currently loading into my Allnic H3000 at 45 ohms. That seems to be the best I have heard so far with my limited time listening. I only have a couple of evenings and 8 hours on it so far.

I will definitely do some experimenting.