DIY cables Vs Mass market cables.

Hey, use whatever you like. (And, in particular, use what you already have.) Bare wire connections are fine in most cases. I have non-standard terminals on both my speakers and amp, so bananas work best for me.

There are many opinions about DIY vs manufactured cables. Search the forums and you will get more opinions than you need. My two cents....Blue Jeans cable RCAs terminated with Canare using high stress bonding, excellent noise rejection, low impedance and decent capacitance. For speaker wires, Canare 4S11 4 strand, twisted, flexible, terminate as you wish (I used bare wires, but am considering silver soldering to good spades for more surface area contact). Good luck, and you probably will be happy regardless of the decision since the differences are small unless you have tens of thousands of dollars invested, and then, everything matters!

Mattybumpkin... a good design? You've lost me guy. Silver is silver and copper is copper...did I miss something here? Adding a colorful jacket/sheilding will not change the composition of the metal. I didn't know Merlin the Magician was still alive. :-)

People can buy what ever they want. It doesn't make a difference too me one way or the other. I've been down the road of cable swapping. I've never been happier with any of them as I am with my own DIY silver cables. For me the speaker cable journey is over..I can concentrate on other components of more importance now.

I'll let others worry about getting more bass from a cable or more midrange from a cable or more presence from a cable....you get my drift?

Gmood1,

Dialectric, twisted or not, spacing, vibration control, shielding, etc. You do know that these considerations make a difference, don't you? And no, it is not magic.

But hey, if you are happy with your own DIY, that is all that is important.

Regards,

Out of the responses so far, hardly anyone has provided Aldres with answers to his question, "how DIY cables compare to audio brand speaker cables." I suspect we can be of more help to him. I do agree with Tgrisham that a forum search would yield many results. I suggest trying Audio Asylum's Cable and Tweeker's forums. The DIY possibilities range from simply terminating Canare 4S11 or HD power cords, both of which have their fans, to silver wires in teflon tubes as has been suggested, to more time consuming constructions such as JR CC89259, Cat5, and the newer VH Audio wire where you have to strip a bunch of fine wires and terminate. Personally, I have built a bunch of the CC89259 cables including the quad version, and found they worked pretty well, and compared well with low to moderate priced commercial brands such as DH Labs and low to mid priced AQ cables, but were beaten by my current Luminous cables. You can check Element Cables website for a professional review of the CC89259. If you don't want to spend the time, there are several companies including Element and Blue Jean Cable, which basically make cables from DIY receipes, put them in jackets and sell them to people not inclined to DIY.