Synergistic New Tesla Line...Any comments?

Just an update on my recent Powercell 10SE purchase. It has settled in my system for about a month and just configured my subwoofer cord into the powercell yesterday. Several forums back nobody(that I noticed) replied to subwoofer/Powercell experimental conclusions. Even though it is just the factory SVS PB13Ultra cord and not a S.R Tesla T3, I will add the bass had tremendous volume, was extremely controlled, accurately fast and well defined at loud volumes.

I am really "wowed" at the difference plugging it into the Powercell10SE. I can just imagine what it will sound like in a few weeks and with a S.R Tesla T3 power cord.......

Ps. Just to refresh, I do have a Holgram A to power amp, T3 to pre, factory 58" plasma tv cord, T2 to Blu Ray, 2 double Galileo mpc's, + sub cord all plugged into the cell....

Regards Bacardi

Last week I started experimenting with the MIGS. I put a set underneath my DAC prototype which had just been sitting on my Esoteric clock. I really wasn't expecting much, if any difference. I was wrong - On ambient, they were awful.

In the "pinpoint" configuration, they got a lot better, now slightly exceeding the performance of the DAC directly on top of the clock. My system is back to life, plus a bit better imaging. The clock is sitting directly on my Esoteric Transport, which in turn is sitting upon 3 Cerapucs. I will probably do some more experimentation putting MIGs under the clock, but only after I figure out what to do with the preamp below.

Yesterday, I put a another set under my VAC preamp, also in the pin-point position. These are replacing FI Cerapucs that were under the preamp. So far, the MIGs seem a bit brighter, with a bit better bass and also a bit better imaging, but I will have to give these several more days of comparison to determine which I prefer under the preamp.

I will also be getting a set of Speaker-cells to demo in a few weeks. I'm being very careful to add things slowly, in order to clearly identify which addition/replacement is responsible for the subtle (or not so subtle) changes to my system.

Just my $.02. Hope this helps.

Fplanner, the MIGs are curious-they break in. Also positioning has a big impact on their sound. I have no experience using them between components, however.

You are quite right about going slowly. I changed speakers, a preamp, and added the SR Universal Cells at the same time. I love my new sound but am having trouble understanding what is mainly important.

Has anyone put miggs on a carpetted floor and what were the results? My Powercell 10SE is on the floor with thin carpet and debating a set of miggs under it. Thx

regards Bacardi

I think this is another question you should ask directly to SR. I wouldn't think it would work.