What power cord for BAT VK-300x SE integrated?

Jfrech, Did you have the SE version? If not, what tubes did you run in the unit? What type of isolation did you use under the unit?

I agree in principle with some of the points made by Jfech.

The 300IX is a very fine integrated and deserves proper care and feeding.

I have found a couple of key accessories from Walker Audio can really do what you are looking for.

I recommend to my customers that they use a set of Walker HDL links which are noise filters which connect to the back of the speakers underneath your speaker cable.

The HDLs really open up a system's sound and improve focus and resolution.

I also recommend the Walker Valid points which are very effective and inexpensive vibration control.

The Valid points are brass and lead damping discs and cones.

When used correctly they also increase the air and sound stage.

There are many great power cords to try.

Jfech-
Thanks for the advice. My budget would be under $500.00 used, which is why I was considering a Black Sand Silver Ref cord. I haven't cleaned the contacts, but that's a good idea. I am not using any sort of vibration control under the amp, although I just got some Herbie's Ultrasonic tube dampers, and they did indeed help with top end air and extension. I was skeptical about these before I ordered them, but the more I have listened, they really do seem to make a difference. I am just trying to push the envelope a bit. I have been researching Stillpoints, and they look like they might work well under the BAT.

Audiooracle-
I'll have to check out the Walker stuff you mentioned. I have not heard of it (which doesn't mean much). I am just getting into/starting to discover the "tweaking" aspect of the hobby now that I have become settled on my integrated,source , and speakers.

You can`t tune your amp that much by changing poiwercords, even if a good cord will improve dynamics and clean up soundstage. If you want a cleaner top, what other cables do you use?
All ic`s and speakercables take away some dynamics & detail, the clue is to find out what takes less..

Hi, it was the SE version. And I used it on my Finite Pagode Master Ref rack with Cerapuc feet...