2. cables
  3. 1215144094

Cable Burn In Problem

I'm trying out some interconnects, XLR. Problem is, I don't want to put 100+ hours on my CD laser, or my preamp tubes, or my hot-running, electric-consuming power amp.

The only solution I se is this. It is possible for me to find some old tubes to put in the preamp (which has balanced and rca inputs and outputs), and have that running into the turned off power amp. Supposedly just the connection is enough, but, of course, the preamp has to be on and have signal going through it.

I don't have any source to hook to the preamp except my digital player, which again, I don't want to put this mechanical and laser life on.

I do have an old receiver, but it has only rca's, so it is useless.

Any possible suggestions?
saxo
jaybo
4,478 posts
 
they should sound fine now. burn in isn't going to make a 'world' of difference. just enjoy your system, and let the burn in take care of itself.
Ag insider logo xs@2x
drubin
3,274 posts
 
I don't understand the concern about putting 100 hours on your CD player's laser. I've never had a laser failure and I tend to abuse the bejesus out of my CDPs for burn-in purposes. They are workhorses -- just do it.
rodman99999
6,158 posts
 
Interconnects will very greatly in their audible differences before burn-in. There's NO short-cut to the length of time it takes, because it's time/voltage that charges the dielectric. I have used a tuner/old, spare receiver (FM output via tape out, tuned to a rap station for the bass/mucho voltage) to perform the output duty(find adapters for the XLR/rca) to save on LASER time. The pre-amp or power amp don't have to be turned on at all.
shadorne's avatar
Ag insider logo xs@2x
shadorne
7,477 posts
 
Saxo,

I really sympathize with your problem but there is really is no way that anything other than playing all the equipment for 100 hours properly all hooked up (exactly as it would be in the music listening real situation) and also with the particular genre of music that you want to break it in for.

I am not sure but I suspect you might need to be there actively listening too for those 100 hours. I mean if you think about it: if a tree falls in an empty forest with no one around to hear it, does it make a sound?
rodman99999
6,158 posts
 
Saxo- Any source that provides line voltage (be it in the form of FM interstation noise, pink/brown/white noise or music signal) to the interconnects will do. Having them connected to the pre-amp, without the pre-amp turned on is all that is necessary for a successful burn-in. The dielectric and conductor couldn't care less what genre the voltage is! When the interconnect is finally placed in it's permanent station, it will still go through a further stage of adjustment, but the majority of the burn-in will have been accomplished(without wasted hours on your tubes, LASER, ears, family's nerves, etc).
More to discover