Power Wedge 1 vs Furman Elite 15 PF

I have the Furman. When I connected my ARC vt200 to it the music seemed just a hair louder and more dynamic. I couldn't hear anything detrimental to the music. My pre remained exactly the same; no ill effects as far as I can tell. However, I could hear the effects of the furman with my CD player especially on guitar strings, they rang and seemed less clear so I don't have that piece connected. Both my CD player and pre benefited from using the Lessloss pc by lowering the noise floor leaving a cleaner and clearer sonic picture so I did not experiment with the furman w/o the lessloss pc's. The furman is very good but I would connect each component one at a time and listen for changes. As always, your experiences may be different.

I use the Furman in both my two channel and HT setups and its great. I run everthing, amps and all, through the Furman and cannot detect any ill effects.

Thanks guys!
I tried out a Power Wedge and it crippled my system. Looks like I'll have to take a look at the Furman, at least it's got a good reputation with you guys!

Ignore my reply above. Here's why. I've been auditioning an interconnect from Signal cable for my CD player (see "Another cable burn-in question" thread). It would be replacing a much more expensive cable from wireworld. Bottom line: with the wireworld cable I did not like the glare in the music that I heard when I connected the CD player to the Furman so I left it connected to the wall outlet. My amp and preamp were left connected to the Furman. With the Signal cable in place of the wireworld, something still did not sound right even after prolonged burn-in. So after much experimentation, I connected the CD player back up to the Furman and lo and behold everything improved- big time. The music was crystal clear, smooth and extended. In short, the new Signal i/c in combination with the Furman is the best my system has ever sounded. Everything seems to be working in synergy. Imagine that.