Satisfied with your DIY power cord?

I have a DIY made with Neotech NEP 3200 cable and Wattgate 350i and 330i. Easily surpases a Shunyata Cobra, my present choice vs. a Black Sand Silver Ref. V on my preamp.This cord is also very competitive with all the other more expensive PCs in my system, doubt I would feel deprived with an entire system wired with this.

Neotech supplies the wire used in the Oyaide Tunami, quite good reviews on that as well.

Ardri,
Did you connect the shield drain wire to ground? If so, on which end (or both)? Thanks!

My AZ power cords both have their shield drain wire connected to ground on the male plug only. I just checked my Audio Horizon cord and the shield wire is also connected to ground on the male plug only. Hmmmmm...

Rja, I did connect the shield drain to the ground at the IEC end leaving it off at the Power Outlet end as I was advised.

The cost is just under $100/meter and I used 1.5 Meters. The plugs were just over $130 each. I do have two acoustic Zen PC's and tested a Siltech SPX-30. Not perhaps a very wide variety so hopefully others will offer more information.
I have it running from an Oyaide R-1 Ac Outlet into a PS Audio Duet thru which I power the Amp with the AZ Tsunami and the AZ Krakatoa feeding the Resolution Audio Opus 21. Before introducing the DIY cable I was using the stock cord which had come with the PS Audio Duet, a very thick heavy gage common electronic utility power cord much like you have with a Computer. When I introduced the Oyaide cable The apparent Volume level dropped so dramatically I wondered if I hadn't mis-wired it. It took just a little burn in and a resetting of the volume to find substantially increased firmness in Bass response and a markedly quieter background so while I didn't have extensive comparative testing I concluded I would likely not be more pleased except perhaps with the Neotech Silver cable which is nearly $1,000/meter.

As long as we're talking DIY PCs, has anyone tried Oyaide EE/F-S 2.6 (10 ga) or EE/F-S 2.0 (12 ga) solid core power cable? Just curious how they compare to Oyaide Tsunami, which I believe is stranded. I think the Neotech PC wires are stranded as well. I believe the quality of the copper is similar in all these wires.
I'm not saying solid core is better than stranded, I don't know. Just wondering.