2. cables
  3. 1271512668

Cardas GR Biwired to double binding post

Hi All,

Just a quick question. I have a set of Cardas GR biwire cables. I'm changing over to Dynaudio speakers which have two binding post only. Can I use these cables on these speakers. Cables are terminated with spades. I was just thinking of puting both + (high / low) on the postive terminal and the same with the negative cable.

Would this work ok. Presume it would same just the same as a normal run of GR cable.

Your thoughts please.

Cheers
Che
che13
dedicatedaudio's avatar
Ag insider logo xs@2x
dedicatedaudio
169 posts
 
Disclaimer: Dynaudio and Cardas Dealer

Hello - the biwire cables can be stacked but it is not optimum. Also, depending on the Dynaudio model, you may have trouble stacking the spades if your speakers are a Dynaudio model which have the clear protective covers.

We can facilitate return and retirmination to single wire to Cardas.

Thank you
Dan
www.dedicatedaudio.com
480.991.8181
tpreaves's avatar
tpreaves
2,686 posts
 
It might not be the optimal solution,but I don't see anything wrong with what you want to do.Then again,I'm not a dealer looking for your money.Good luck.
grannyring's avatar
grannyring
6,479 posts
 
My experience is stacking sounded better then using one of the biwire sets.

More powerful bass and greater stage size.

This was not cardas wire however.

Simply run one set and put electrical tape over the spades not in use. Then stack and compare the sound. See how both set-up's sound in your system.
che13 OP
19 posts
 
Thanks all for your feed back.

The dynaudios are confidence 5 and they have very large binding post so stacking the spades should not be a problem.

My thoughts are much the same as everyones here. IF you stack them they will be getting the full use of the entire wire so it should be the as buying a normal run of the cable. Only weakness I can see would be with the spades them selves?

Cheers
More to discover