2. cables
  3. 1290886462

Dedicated line

I have done a bunch of reading on dedicated lines and talked to an electrician and just want to confirm with people here this makes sense. I already have sub-panel which is on the opposite side of the wall where I have my audio stuff plugged into.

I am thinking of setting up two dedicated lines. Since the run of wire is short (10 feet tops) I was thinking 12 gauge to a 15A circuit breaker with TeslaPlex receptacles. I was thinking of using solid copper Romex wire. Does anyone have any other wiring suggestions

Grounding is my biggest concern, my electrician said I can drive a 6 foot grounding rod into the ground and attach the 2 dedicated lines to it. Does this make sense?
Thanks in advance.
davea33
avphile
15 posts
 
Steve, can you tell us/me a little bit about how you did the grounding? Is there a particular site for info on this?
Thank you in advance.
jdub39
497 posts
 
I'll second the use of 10awg as it sounds better than the 12awg I have for my sources. The third line I plan to install will be 10awg!
lak's avatar
Ag insider logo xs@2x
lak
4,680 posts
 
I like the idea of 10 gauge wire on 20 amp circuits. Your electrician will know the code for your area and the best way to run the ground.
rrog
1,958 posts
 
If you live in a dry climate two eight foot grounding rods spaced 6 feet apart is recommended.
davea33 OP
40 posts
 
Salevick, what additional info do you need?

My electrician says if I use 10 gauge wire then I will need a 20 amp circuit. Since the run is so short and the draw is minimal I thought 15 amp 12 gauge wire would be fine with a 15 amp circuit. Can you hook up 10 gauge wire to a Teslaplex? Any reommendations on wire?

Also, plan on using one of Alan Maher's circuit breaker filters. Since I'm rewiring, I plan on putting it in the inside of the wall. Any thoughts on this.

Thanks for everyones response.
More to discover