XLR and RCA interconnects in the same system?


Hi
I was wondering if someone could tell me if you have XLR interconnects between your cd player and your preamp and RCA between your preamp and amp does that negate the benefit of the XLR not having balanced inputs on all the components?
Thanks
mxb289
mxb289
I second the comments by Kal, Kijanki, Rdavwhitaker, and others that a balanced interface can sometimes provide significant sonic benefit regardless of whether the components are internally balanced or not.

In addition to the reasons they mentioned, I would add that a balanced interface will provide considerably reduced susceptibility to ground-loop issues, and also will reduce sensitivity to cable effects and differences (particularly if the output impedance of the component driving the cable is low).

Ground-loop issues, btw, do not just involve hum problems. They can also result in an increased amount of low-level high frequency noise, resulting in degradation of "background blackness."

Does all of this mean that using balanced interfaces between components that are not internally balanced is generally preferable? Of course not. It is dependent on the quality of the implementation in the particular components, numerous unpredictable system-dependent variables, and overall system synergy.

But as I see it, it all clearly means that a blanket claim that using balanced interfaces between components that are not internally balanced will necessarily result in little or no benefit is incorrect.

It's ironic that listening experience here is being used to deny the possibility of significant sonic benefit, while science is being used to advocate that possibility. Usually it is the reverse that seems to occur.

Regards,
-- Al
Post removed 
Elizabeth - you can compare only equivalent XLR to RCA. It might not make any difference in your system if you don't have ground loops or noisy environment but I like to think about it as a form of insurance against possible problems. I use short runs of one of the best neutral sounding XLR cables hoping not to ever change it. I don't see any reason not to use XLR since my DAC and power amp accept it while the price difference is minimal.

In addition my Rowland 102 amp has only XLR inputs. This seems to be the latest direction Mr. Rowland goes since his latest expensive class AB model 625 power amp has also only XLR inputs. Obviously he sees benefit of it and I trust him completely.