2. cables
  3. 1417566123

Directional speaker cables - switching direction

Some time ago I started a thread regarding speaker wire directionality and my inability to understand how it could have any affect on sound quality. The question was inspired by the fact that, after quite a few years using them with my Martin Logan Odysseys, I discovered that the cables (Straightwire Octave 2) had arrows printed on them. Not surprisingly the opinions expressed were pretty strong on both sides of the argument but those supporting directionality were the most vociferous and in greater numbers, one to the point of being downright insulting. In no case, though, was an explanation given by those supporting the importance of cable direction for how this phenomenon occurs except that it should be obvious that when a cable is broken in in one direction only someone with an uneducated ear would be unable to discern the difference.

Even though I still don't get it I'm not taking the position that there is no validity to the directional claim; if there truly is I just don't understand how. This leads me to my two part question. I haven't been using the Octaves for a few years but now, because of cable length issues, I want to put them back in my system partly to avoid the cost of new quality cables.

IF, then, the directionality theory IS valid and I don't recall which way the arrows originally pointed or which direction they were "broken in" do those in support of directionality think I should install them with the arrows pointing toward the speakers
128x128broadstone
beewax
173 posts
 
Switching direction is easy, fun and free, Why not. Or You may want to check out "Audio Myths Workshop" at YouTube.
mceljo
1,356 posts
 
We may not know the mechanism or just not be willing to consider that the change isn't the gear. How do we explain changes in the way we perceive the sound when nothing in our gear has changed, at least nothing we can control?

If my gear wasn't in a heavy entertainment cabinet making access to the back of the amplifier difficult I would probably do some swapping, but considering it takes an effort to squeeze in a critical listening time with two small kids, it is unlikely to happen.

I have had more than one experience listening where things just didn't sound right on a scale that I am positive is more significant than reversing my symmetrical cables could be. It is really hard to identify real differences when any change is expected to be within the normal range of the system sounding great or not so great. I find, for example, that I perceive a better sound most f the time in the evening when the sun s ting down. Is it related to the power grid or is my mind just in a better place that time of day? Impossible to know for sure.
wolf_garcia
6,686 posts
 
Using cables attached in the wrong direction opens the door to chaos...once on that path you could be doomed...is it worth it? NO NO NO...However, one thing you can try is to erase the little arrows and anything saying "speaker" or "amp" on the cables, shuffle the cables around blindly, and plug 'em in. Stand back and duck for cover as the entire neighborhood could explode in one of those zombie-esque nightmare scenarios...good luck.
timrhu
2,779 posts
 
I truly envy those who have enough time in their lives to sit and critically listen to their cables and then swap the direction and do it again. And to ensure they heard what they think they heard, do it all again over and over.
montytx
138 posts
 
While I'm a big believer in cabling, I'm a bigger believer in cable settling, which can take a long time regardless of the directionality of the wire.

If you haven't used the wire for a couple of years, you will be essentially settling a new cable and should be able to hook it up in any direction and still need a few hundred hours of constant signal being passed through it to fully stabilize the cable.

If you find this a little too much to swallow then I sure as heck wouldn't worry about directionality as it's far less significant than cable settling.
More to discover