Best cleaning fluid procedures with VPI HW16.5??


I need to buy more record cleaning fluid to use with my VPI HW 16.5 that I recently purchased. Obviously I'm thinking of the VPI fluid (& it's the cheapest), but I was wondering what other fluid might be better, like perhaps the Disc Doctor Miracle Record Cleaner? Also, does anyone else believe in the Michael Fremmer theory that one should clean records with an Orbitrac or something BEFORE using the VPI?
It sounds like a great idea, but pretty extreme to me.......most of my records are about 10-20 years old, but were basically well cared for. Years ago I used to use the Discwasher brush & fluid (which probably seems pathetic now), so I don't think most of my records are all that filthy & hopefully will not contaminate the cleaning pads all that quickly on the VPI??

Anyway, I've only had the HW 16.5 for a few months, so I'm looking for any advice on using it to best advantage. I've had a Rega P25 with a Benz Glider for over a year now so am enjoying "getting back into vinyl". Thanks!
steveaudio
I really appreciate all the feedback......I have to admit I didn't know what I was getting into tho when I bought my 16.5. (I actually bought it to save time over just getting an Orbitrac--little did I know!) Thanks, Steve
It does save time- time being frustrated hearing snap crackle and pop, and adds much more time enjoying records you bought sometimes 4 for the price of a cd. That's what I like. Once the new " old records" are cleaned good, maintainence with Orbitrac/16.5 will keep them going. I use clean new sleeves after cleaning as well. Excitement awaits at the "New Arrivals" bin at the used record store. Enjoy.
10% alcohol is a lot. You usually don't need to break anything down on viyl because not too many things bond to vinyl. If some solvent is needed, it should be not very volatile. More than 99% of of records can be cleaned with a surfactant. Some may require soaking for longer periods; 15 - 30 min, but they usually come clean.
Bluesman-

You're right about 10% alcohol being alot. I just mixed up another batch and it was actually less than 5%. It was just enough to get a faint odor and no more. I don't know of any other solvent that will dissolve readily in water, which is a necessity if one wants to the control volitility for this application.

A note on soaps (surfactants) is that more than a large drop of non-conditioning shampoo or a couple of drops of dish soap per 8 oz of distilled water will cause sudsing while brushing and vacuuming.

Might try first soaking the record with just soap and water for 30 minutes or so (maybe longer), as you suggested. Would you recommend a little bit more soap in the mix for the soaking stage?

JIm
If a record is really dirty, I use a stronger solution of surfactant. Only certain surfactants are good for vinyl. All of those are liquid at room temp. This is where a small amount of solvent helps get more of the surfactant into solution. I use thw white felt brushes that my dealer sells in 10 packs. I don't know who makes them. Because they're whit I can see if there is still dirt coming off the record. If there is I wash it again. I have occasionally had to wash records 3-4 times.