Ideas for a complete analog set up 2500- 3500

BASIS 1400 TABLE,REGA RB600 ARM AND CARTRIDGE TO MATCH YOUR PHONO STAGE OR PREAMP FOR GAIN.

Bbtuna:

I am in the same boat as you are right now. And with that, I am planning to ultimately spend about $2,500.00 on an analog system as well, though I am going to do so over the next couple of years. What I am going to do is acquire the phono stage this year and see if I can make due with a Thorens until I get the table I really want (which means I want to start enjoying vinyl THIS year). But over the next couple of years, here's what I hope to end up with (not to say that this is the combination that you may want. I will put another one out there just for you in a moment):

Phono Stage: Monolithic PS-1 Dual Mono Phono Stage + HC-1 Dual Mono Power Supply (to be bought separately).
Interim Turntable: Either a Thorens TD150, TD160, TD165 or TD166 (from August 2002 to about October 2003).
Turntable/Arm System: Either a Rega Planar P25 with RB600 Arm or a VPI Aries Scout with JMW-9 Arm.
Phono Cartridge: Grado Reference Sonata.
Record Cleaning Machine: Nitty Gritty Mini Pro 1.
Cables: MITerminator 2 or Cardas (their MOL cable).

But now, here is a combination that you can try as well:

Phono Stage: Monolithic PS-1 + HC-1 -- $658.00.
Turntable/Arm System: Rega Planar R25/RB600 -- $1,200.00.
Cartridge: Clearaudio Aurum Beta MkII -- $350.00, Dynavector 20XL -- $525.00, or the Grado Reference Sonata (the one I am going to end up with) -- $500.00.

Record Cleaning Machine: Nitty Gritty 2.5Fi Vacumn Record Cleaning Machine -- $625.00.
Cables: Cardas (don't know which ones, nor how much you want to spend) -- $500.00.

I will re-interate again, the first combination listed is the one that I am striving for (but of course, you are welcome to audition as well, if it turns out to be your cup of tea), and the second one was the one that you may try out. But if you come up with other substitutions or suggestions, try those out as well.

Good Luck as you start to seek out and put together your analog system. I know you're going to have as much fun as I am.

--Charles--

Bbtuna:

I'm sorry....... my mistake...... I meant the Rega P25. Accept my apologies for the typo??

Thanks.....

--Charles--

It seems no one has mentioned Linn. I know it's not sexy but the newer modified tables are much less maintainence work, still sound good accoding to John Atkinson of Stereophile and you can likely find a fully modified Linn with Lingo and Ekos for a little over $2000. Just food for thought.

I cant be quiet about this. If you want good looks, go to circuit city and buy a goddamn sony with all the pretty lights. They even have remotes that let you set every band on the 400 band EQ that is built in. I understand that the model that still has a phono section had the budget increased to allow for 1.20 worth of guts behind the phono plugs.
OY VEY..... LP-12 is about as solid a table as you can get. With any of the Linn gear, you get about as close to what was put on the vinyl pie as is possible.
While I agree with the advice of a good record cleaner, I would listen through the dust that remained after a brushing in order to get the best arm/cart as possible.
My suggested system: LP-12 Val/pwr suppl. Rega arm and one of the billion carts out there.
Talk to David Wilson @ Accent on Music in Mt Kisco NY
(914)242-0747. You can get a used one and have him look the thing over for you. I have seen people pay big money for substandard tables when they could have bought a used Linn and had David go through it for the same $$$ and in the end had a MUCH better deck.

If you want pretty, take the money you saved and buy some art for your wall. :>)