2. analog
  3. 1026150328

Best Phono stage for a .3 mv Ruby 2 ?

Hi All,
I am currently using an arc ph-3 which is set up for my rega super elys. I just got a new Basis 2500/graham/ruby 2 and find the ph-3 is set too low. I'm going to try clipping in some of the supplied ARC resistors. In searching around I see that quite a few people recommend a solid state preamp with this low output of a cartridge.

What is the best phono stage for a .3mv ruby 2 ?

I have heard that the new lukaschek is quite good with this combination. I also have a used aleph ono on the way.

My system is aleph P/aleph 2/avanti centuries. I do have a vk-5i pre that I'll try with the different phono stages.
john_l
john_l OP
782 posts
 
Well I found a review of the ruby 2 in TAS. They used the high end herron with it for a time, then switched to the pp-Lukaschek pp-1 T9. They said it was a closer match to the character of the cartridge, but there was a small loss of detail. I am actually surprised to see that given the minimalist circuitry within the unit.

If might give it a try a little later. I'm experimenting a little with the sound of my system right now, so I don't want to introduce too many variables.

Thanks everyone for your input. What a family !
gajgmusic
175 posts
 
Dear John:

Hope you will post your followup on how things go as I am in a similar boat. Good luch

gary
marakanetz's avatar
marakanetz
5,473 posts
 
...so would T9 be a better match for Benz carts than more expencive phono-stages like Jeff Rowland, Plinius or Aesteghic IO?
did anyone compare this case?
albertporter's avatar
Ag insider logo xs@2x
albertporter
4,949 posts
 
I've auditioned the Benz Ruby on a Lukaschek, Counterpoint SA9, Audio Research PH3 and Aesthetix Io.

The best performance was Aesthetix Io, second Counterpoint SA9 (with NOS tubes), third was sort of a tie between the ARC and Lukaschek.

I admit fondness for the small size and craftsmanship of the Benz phono stage.
thomasheisig
568 posts
 
I used the regular Ruby some time ago. It was a special one without body and with very low gain, I think, 0.2 mV.
I used it in my Basis Debut/ Graham.
I use a Klyne 7 PX 3.5 phono pre amp.
Absolutely no problem. Plenty of gain even for this cartridge. It is excellent sounding and you can adjust it exactly to the Benz system ( Impedance, 47 k ....).
More to discover