Where 2 buy 3x distilled water and 100 alchohol?

Try Daigger laboratory supply, www.daigger.com

Bill E.. I take it that you are going to mix the alcohol with the distilled water. In that case, you don't need 100% alcohol, which is difficult to find. I use the methanol sold in hardware stores, which is pure enough. I suppose that you are talking about methanol and not ethanol or iso-propanol. The need for triple distilled water is also questionable. Simple distilled water should be sufficient, if you are intending to use it for vinyl disc cleaning.

A good and cheap substitute for distilled water is to collect the water from a clean room dehumidifier.

Salut,

Bob P.

Hi Bill:

Agree with Bob, but switched to 91% Isopropyl alcohal (available @ many drug/grocery stores for $1.50/Pt as it should not not contain toxins that are sometimes created during higher levels of distillation (such as is possible with the higher grade electrician'e alcohal that I used before). Think that benzeine (not certain if this is the one, but it's something like this) can sometimes be a bi-product of the higher distillation technique.

I wonder about alcohal effecting plastsizers over time (though have experienced no noticable damage with some LP's that I still own and that were cleaned with various alcohal/water solutions over the past 30 years:-), so use only a 20/80 mixture, by volume (plus the alcohal is already diluted @ 91%) and then rinse the crap out of the LP with a Water-Pik and distilled water. I have a gizmo (Groovmaster) that protects the label area of the LP during the cleaning/rinsing process and use a long bristled brush for the cleaning itself. If you use a vacuum/brush machine then that's fine, maybe do a second "rinse only" cycle if you have the patience?

For various formulas check out the vinyl and tweaker's forums @ Audio Asylum. Some people add a few drops of "Photo Flow" to the mix (allows the solution to reach/flow deep into the grooves) as well as a mild detergent. I figure that most are fine as long as they are not left on the LP for a long period of time (the shorter the duration the better) and also granted that the LP receives a good rinsing following the cleaning.

I go through a gallon of my home brew per week cleaning up thrift shop finds (since it's cheap I don't chintz on it which I would most likely do if I were paying $30-$60/gallon for the stuff).

I would guess that a chemical lab supply house would have them. Try the Yellow Pages or get in touch with someone at a local college to see who supplies them. I know that for my model railroad painting needs I required distilled water and found it at a local drugstore. Was it 3X distilled or not, who knows. It worked fine with acrylics though. Home brewed D-3 fluid heh? What will they think of next. Good day.

Distilled water is not as pure as deionized water (DI water). Try getting some DI water from a chemistry lab...