making our own custom cables/interconnects ...

But then where would the fun be if you don't drop a few thousand on cables? Seriously, if you have good electronic construction skills you should have no problem making decent, inexpensive cables.

Do a search at www.audioasylum.com. They have an entire section on homebrew cables.

Well, it's not really that simple. I agree with Drrasta that the best place to start looking is the asylum. Simply taking silver wire and wrapping it with rubber will not yield good results. There are many, many great DIY ideas for cables out there, ranging from very inexpensive to reasonably priced. There is a very complex science involving cable construction (the equations are fairly high level), and the construction itself can be tricky/tedious. Look at Chris Van Haus stuff, and also at www.diycable.com. Jon Risch at the asylum will be able to help you out tremedously, but don't think that the high prices of some cables aren't completely justified. Don't expect to be able to make cables that will compete with Synergistic/Transparent/Siltech/Nordost, but you will get VERY reasonably results. All the cables in my system are per Risch's recipies, and I couldn't be happier. Cheers!

thanks form the input..

what about pure silver and pure copper wires ?
what do they consist of ? is there any ressource where we could see the basics of making a great sound cable ?
like diff layers to apply, basis of metal condution ....etc..
??

thanks..
Jin

i have done a lot of this. try www.vacuumstate.com. they have a whole book on diy cables. i have made several of the cables and they are quite good....and very cheap. i have had 4$ speaker cables kill 1500$ ones. so can you build nordost vallahua??? no. can you get a much better than average (500-1000$) speaker and interconnect doing it yourself....oh yeah! as to your wire question. i have used .9999 silver 30gauge wire; 40 gauge magnet wire (copper). i like the thinner wires. silver is to taste i think. i like foils for most of my stuff. copper foils are good too. have not bucked up for silver foils yet....when my listening room is completed...i will really get into this (feb 2002). anyway...from my rambling...i think you can diy and save; without sonic short falls. oh as info my system consists of joule elec la100m3; rogue 120s monos (nos tubed); mac 67 tuner; birdland dac; vpihw19 tt with fidelity research arm fr64fx; shelter 501 cart;arc ph3 phono stage and merlin vsm-ms; yes and all homemade cables. as you can see i have spent some money on equipment. i just think that cables are way out of line in their price. if you like tweaks you should read redkiwi's posts on equipment stands to. really some intresting stuff. IMO

good luck jim