"Best" cable elevators?

The good thing about this tweak is you can make some cheap ones to try in your system before you really spend any money, also you can add/remove cable elevators without disconncting anything so pretty easy to compare.

I know some people hear claim they hear difference, but I have had 2-3 people over and we tried several times with and without elevators and no one could hear any real difference, so I don't use them.

Some cables may be more effected than others, but I would experiment before spending any money on elevators.

Tireguy's teepee idea with wood dowels would be very easy and inexpensive to make. If you check Mapleshade Records site they have some "teepee" cable lifts for sale........another advocate for cable lifts.

Tim is right on, I have done the same thing at a fraction of the Mapleshade price. The only differnce between our teepee's is I used a ball between the three legs to build a common size. While the legs of the teepee were held securely I used wood glue to bond them together.
I use these tepee's to hold up my five meter pair of ICs too. They have worked very well but the initial setup can be tedious if you have heavier cables. My new Purist Museaus speaker cable is very heavy and give the stands a run for their money.
If I had it to do over again I would try using a short (1") section of shrink wrap placed over the form. It is easy to use and the small cup could help hold more glue where it is needed.
Good luck, and remember if you try it, this is a cheap tweek so don't get dicouraged if a couple of the tepee's break. Have fun!

I'm using a set of ceramic coffee cups and spark plug wire separators. On one side, I have a power cord running through the handles of the cups to keep it off the floor and away from the speaker cables. Cheap and effective.

jd