Linn LP12 Black Felt Mat How do you keep it on ?

I will add another reco for the Extreme phono donut mat on the LP/12. More detail w/o losing postive qualities. My Linn dealer likes it better than the felt mat. SC53 are you serious about your Linn dealer not servicing the table.. come on really?

One downside of the Extreme phono mat is that you really need to turn the table off between records since it has a sticky quality.

While we are on the LP/12. Another cheap tweek is to remove the bottom board. When you do this you can't use the stock feet. Go to target and buy the 3M clear round poly feet I think 1/2 or 3/8 inch in diameter and very thin. Stick them on the corners of the plinth. Again more quiet more detail. $2.00 investment.

I've owned three (3) lp-12's over the last 20 years. I can count on one hand the number of times the felt mat stuck to the record. Also, I agree with the guy that likes the felt mat better. It is. One in every crowd!

Or, if you've got some extra green burning a hole in your pocket, get a VPI record cleaner. After I clean a record with this and put it into a VPI non static record sleeve, there is no more static. I do not have to use a record brush anymore and the felt mat never sticks to the record anymore. Besides, the VPI makes the record sound really good, it cleans up the midrange and gets rid of of a lot of noise that I used to think was due to scratches - it was just dirt.

Mike

My felt mat has NEVER come off! And I live in the dry arid winters of Chicago. This is the first I've heard of it. I leave the platter running while I change LPs and even that doesn't generate enough static to cause the mat to stick to the LPs.

Here's something that I've been doing recently to pick up the dust on some LPs, and this might also take care of the static that some people seem to be suffering with: I take a Pledge "Grab-It" pad and while holding it folded, lightly place it on an LP as it spins for 3-4 revolutions. It can pick up quite a bit of dust and dirt, depending on how dirty the LP is. My Linn sounds good enough that I don't want to even try another kind of mat.

NOTE WELL: Pledge makes two kinds of Grab-It, one with a compound included that you don't want to use and another (in the blue packet) that has NOTHING added. It is simply a cotton cloth with anti-static properties. It works great and might also reduce the static problem with LPs.

Had the same issue with a VPI. Started using a wet-vac cleaner on my records and the static vanished.