Sony sacd "custom setting"

Put it on Custom - huge dofference. I have put it on custom with amps from Adcom to Levinson.

I called Dunlavy Audio and spent almost an hour chatting with John Dunlavy. Talk about customer service! I knew my amp and pre-amp would have no problem with the signal in that they are built to recieve and send that. The speakers were the unknown. I have the SCD-1 and it turns out that Dunlavy is using the same unit in there demo room. John's comment was "let's try it, the worst that could happen is we replace a couple tweeters". I guess the electronics of the cross over is safe, so if your willing to risk your tweeters go for it, assuming your other equipment can handle it. I switched it over seven months ago and it made a difference, not as big as others have reported with the SCD-777ES.

I am a technical dunce. What specifically should I be looking for regarding my amplifiers, preamp, and speakers in order to safely use the custom setting on my 777es?

I believe the frequency response for SACD in the custom mode is 50,000 hz, vs 20,000 hz standard (hearing limit). If I'm wrong on this it will be corrected within minutes by great and misterious powers. The specifications of your remaining componants (from manual, or web site) will quote a frequency response or input frequency (my Kora pre-amp is 10Hz-200Khz and amp is 2-55KHz)

Actually the std setting allows freq upto 50khz to proceed through the player while the custom setting allows frequensies as high as the theoretical limit of SACD : 100khz. Regards, Mike