Okay, Teres owners please take out a ruler and tell me how tall your armboards are. I'm getting conflicting information as to the height. Chris states in an email to me that 27 mm (1.06") is the right height and that sounds good based on my problems. The one supplied was over 41 mm (1.60") and another owner is under the impression that is the correct height. The only thing I can think of that would make both these two dimensions work is if the platter height had changed at some point.
Say it aint so--- Teres quality question
As a preface-- I have been a lurker here at Audiogon for a number of years, but have never posted.
Yesterday a review of the Teres 200 series table was posted at Audioasylum. I am extremely concerned about what was stated.
I have always read fantastic things about the Teres, but this reviewer seemed to consider some issues with regard to quality-- ie:
"Some minor issues...the wood platter is not 100% true on the horizontal surfaces...a very slight rise...I suspect this is the nature of machining wood?" as well as "Product Weakness: Platter slightly off true"
I plan on joining the Teres family -- but have developed some reluctance after reading this.
Perhaps some of the members here with first hand experience will be able to put my concern at ease with regard to the reviewers statement.
Here is a reference to the post:
Review by Angus Black III on January 06, 2004 at 10:35:32
Thank you, and a special thanks to TWL for the always informative reading.
Focusedfx
Yesterday a review of the Teres 200 series table was posted at Audioasylum. I am extremely concerned about what was stated.
I have always read fantastic things about the Teres, but this reviewer seemed to consider some issues with regard to quality-- ie:
"Some minor issues...the wood platter is not 100% true on the horizontal surfaces...a very slight rise...I suspect this is the nature of machining wood?" as well as "Product Weakness: Platter slightly off true"
I plan on joining the Teres family -- but have developed some reluctance after reading this.
Perhaps some of the members here with first hand experience will be able to put my concern at ease with regard to the reviewers statement.
Here is a reference to the post:
Review by Angus Black III on January 06, 2004 at 10:35:32
Thank you, and a special thanks to TWL for the always informative reading.
Focusedfx
- ...
- 77 posts total
- 77 posts total