2. cables
  3. 1037849291

How long....Silver....How Long?

I bought an Analysis Plus Silver Ovals speaker cables( used). Right now, I have it connected for 24 hrs. straight playing music. The sound is okay but not impressive, it's a little bit harsh still. From one of the posting that I made, a member commented that for silver, it takes longer to "break in" the cables. My question is as follows:
1. For used cables(such as mine), does expected break in periods still apply?
2. Roughly, how long should I wait until the cables shows its natural sound? Or at least a hint of it.
3. Is it premature to say that the cable is not a good match in my system?

all comments and suggestions will be greatly appreciated!

thanks
amandarae
ljgj
955 posts
 
I used silver with my tube amp with some success but really never preferred them to copper or hybrids. They tend to be bright to my ears and even when burned in (cooked) as they say only with the warmth of a tube amp do they sound acceptable to my taste. When left without use they go back to the uncooked stage and take longer to come back to the sound I like. At least this is IMHO.
warrenh's avatar
warrenh
2,299 posts
 
If the person you bought the cables from had them disconnected from their system for a few weeks, I would start the break-in process all over again. 24 hours ain't nothing for silver. Talk to us after 400 hrs. (although you should hear improvement after 200 hrs.) I know this sounds ridiculously long, but my Audio Magic Stealth took that long to break in, because of the nature of silver. It's dreamy now. I don't know if I'm comparing apples to oranges, but I'm just going by the nature of silver, and the inherent need for very long breakin times.
g_m_c
443 posts
 
You might want to make sure that the cables are oriented in the proper dircection.

You should also give them a good week to settle in.

Some silver can be a bit lean/harsh with a ss amp.

good luck, I hope they settle down.
docjr8156
34 posts
 
See my post at cable asylum.
glamont7801
4 posts
 
Good God cables do not revert back when they have not been used. Once broken in they are brooken in.
More to discover