2. analog
  3. 1089828661

Dynavector Cartridge Load 100ohms or 47k ohms?

I have a Rogue audio Stealth phono preamp and a Dynavector 17d2 cart. The recommended load on the cartridge is >100ohms. My dealer said in he likes the 47k ohms setting better than 100. It does have a greater sign on the recommended (>100 ohms, not = 100 ohms) -- any experience with this.

Ultimately I'll try them all out but wanted ideas.

Also is tweaking with the gain usefull or should I just go by Rogue audios recommendations

Thanks,
Rob
robm321
dougdeacon
3,338 posts
 
Raul,
You're right in theory of course.

Unfortunately the cartridge manufacturer's specified impedance was "> 100 ohms".

Which number > 100 would meet with your approval?
kehut's avatar
kehut
668 posts
 
What??? I have a headache now!!
rauliruegas
13,129 posts
 
Hi Doug: The best in this cases is to ask to the cartridge manufacturer.
Regards and always enjoy the music.
Raul.
dougdeacon
3,338 posts
 
ROFL
robm321 OP
932 posts
 
Yes. That was the original problem for me was that I tried 47ohms because of the openess and then realized my bass was gone and it was topend loaded, "bright" - so I figured I'd go by the manufacturer's suggestion... Well they really don't suggest. ">100 ohms" sounds to me like 100 ohms is NOT suggested and anything above that - from 101 to 47kohms is recommended. Sounds like you are on your own to decide. I think I'll try 300 which is the next step up. It seemed very smooth last time I tried it.
More to discover