What are the best DIY cables you've heard?

I'm getting marvellous results from a pair of homebrew interconnects between DAC and amp following Greg Weaver's SST article. The IC I built uses copper magnet wire (0.02 mm^2/~34 AWG), 38mm wide tape (Tesa 4124 clear) with about 30mm spacing between the parallel wires. Using narrower tape than what the original recipe prescribes may be a step in the right direction toward getting an elegant termination - the only difficulty with this design. I would love to hear from anyone who was pleased with flatline / ribbon / tape cable cooking or found, comparatively, other geometries significantly better.

SST recipe http://www.soundstage.com/synergize/synergize021998.htm

mm^2 : AWG
http://www.oilfield.de/download/techtabs/electric/cable001.pdf

Twl, thanks for the lightning reply - you were so fast, you caught me in the turn! I'll build my first pair of ---'s directly with copper 30ga. (If after lugnut's indiscretion your homebrews become famous, how would you like them to be known in the afterworld?)

Just DIY interconnect cables would be fine with me. No ego to stroke here.

I made some cables per twl's recipe last weekend and they do beat my RG217 cables, by a small, but significant margin.

Since I already had RCA plugs lying around, and PTFE tubing it cost me $4 for the magnet wire. What a bargain.

Thanks for the recipes guys ! Twl .. do you have a good speaker cable recipe ?

Question about this stuff: the only teflon tape I could find is non-adhesive. It's really stretchy and sticks to itself when you stretch it, but it doesn't have any adhesive of its own. I need to keep looking, right? Is this the stuff you've been using?

Have ready to fire: WBT RCA terminators (x8), 25' expandable sheathing, 25' of teflon tubing, heat-shrink to go around, and this questionable teflon tape. All I'm waiting for is the wire (decided to go 32 guage, teflon-insulated silver, on order) and I'm off to the races. All I have yet to iron out is whether to run the signal wire down the center of the tube or wrap it with the ground a la Chris VH design. Anyone tried it both ways?