cartridge for Eminent Technology ET2 tonearm?

Dear Alanpiga: **** " It will be happier with a cartridges with medium to lower compliance cantilever assemblies. " ****

What Rushton is telling you with this statement is that your tonearm can handle almost any of today cartridges.

So, what cartridge can you choose?. It depends of your budget and the kind of music that you like.

There are many good cartridges out there, my advise for some: Shelther 90X, Sumiko Celebration, Transfiguration Spirit 3, Ortofon Kontrapuntk B, Clearaudio Discovery, Allaerts Boron, Dynavector XV-1. All these cartridges can " make " real music and I'm sure that at least one of them it will be on your budget.

Regards and enjoy the music.
Raul.

The lower the compliance of the cartridge, the more suitable it will be for use with this arm. If using the damping trough with the ET II, this increases the range of varying compliances that you can use, but i would still stick with a low to medium compliance design for best results. Medium-high to high compliance designs should be avoided like the plague with this arm due to the mass involved and the resonant frequencies that will result.

As a side note, i suggested the Denon 103 as it has excellent bass and transient response, which will be quite noticeable with full-range type speakers. One can tailor the high frequency response of the cartridge to suit their listening preferences via adjusting cartridge loading in the phono stage. On top of that, this is an inexpensive cartridge that works very well. Familiarizing yourself with the use of this arm without having to worry about damaging a mega-dollar cartridge can make listening to music a lot more relaxing.

If you wanted to spend more money, you might want to look into the ZYX cartridge line that Frogman mentions. These cartridges will work very well both mechanically and sonically in an arm & audio system like yours. Some of the more expensive Lyra designs are also very nice sounding, but they are also on the leaner side as compared to the Denon's and ZYX's. I've no experience with the Shelter's, but from what i've read, they might be a very suitable candidate also. Sean
>

I ordered the Denon DL-103R cartridge based on your advice, folks, thank you, sincerely.
I really don't want to spend a lot of money in this and I am happy to "hear" that technically it won't be a mismatch.
Just what I needed to hear!!!!!
And I will feel peace of mind to be able to return the borrowed cart.
I am amazed at the quick and interesting responses from Audiogoners.

Good for you Alan. I would recommend experimenting with cartridge loading once you get the Denon installed. There seems to be a general consensus as to where this cartridge tends to work and sound best in terms of a loading range, but this will vary with personal preference and system response characteristics.

Out of curiosity, where did you order it from? Sean
>

I ordered the DL-103R from Action Accessories in Linden, New Jersey. It will take 14 days to get here they told me. I read somewhere about a place called phonophono with excellent prices but I believe it is in Europe.
As far as cartridge loading, I have not even opened the Cotter step up transformer to familiarize with the inwards of it therefore I have no idea how to change the loading. I understand in general that it is done by changing a resistor with one of a different value and I read somewhere that the DL-103R worked well into a Cotter transformer with an impedance of 40 ohms, which is interesting because I believe that the internal impedance of the DL-103R is 14 ohms and I read also that when a low output cartridge is driven with a step-up transformer the loading in the transformer should match the internal loading of the cartridge, and, I know, it is a starting point, not necesarily the best solutiuon.
This is my first low output cartridge. So in practice I am completely new to this.