My system consisists of the following: EAD T1000 transport EAD DSP7000 mk3 dac Sonic Frontiers SFL-1 Signature preamp Sonographe SA-250 amp Mission 753 (original) speakers I am using a Kimber DV75 digital cable between the transport and dac and DH Labs BL1 mk2 interconnects between the dac and preamp, and the preamp and the amp. My speaker cables are Audioquest Crystal 2, biamped. I have upgraded the dac power cord to an NBS Dragonfly and the preamp power cord to an Absolute power cord, with all my electronics being plugged into an Audio Power 2 conditioner. While the sound I'm getting is crystal clean and clear, it leans on the bright side of the audio spectrum. My speaker placement is about 11" away from the back wall and I'm getting good bass out of the 753's. I suspect that the DH Labs might be the culprit here, and of course the speakers - but I'm not about to replace the 753's as I love the looks and sound. In short, I am looking for recommendations out there for interconnects that would tame down the sizzle from my system. I have a budget of $100 a pair (in the used market of course) and am seriously considering my friend's Cardas Quadlink 5C interconnects. That leaves me with the other pair of DH Labs to replace. Comments?????
a)IME, the logical, conservative plan of action would be to listen to and come to some conclusions about the Quadlink before making desicions about a second pair of interconnects.
b)Correcting highs with cables can be a more compromising solution relative to approaches like the ones added by Cody and Driver.
If you have not tried the Quicksilver pure silver IC's at www.quicksilveraudio.com, I can't say enough about them. They bested MUCH higher priced cables in my system. They are $90/meter.
You must have a verified phone number and physical address in order to post in the Audiogon Forums. Please return to Audiogon.com and complete this step. If you have any questions please contact Support.