What determines 20 amp is the wire from the box to the outlet.i.e. 20amp requires 12 ga. wire/ 15amp is 14 ga. Be sure the value for the breaker controling that outlet is 20 amps. Plug a radio in that outlet,have it playing. Then go to the pannel. Shut of the 20amp breakers one by one. If your radio shuts off---that's the breaker. There are different 20amp connectors; just so the breaker that turns off your radio, says 20 on it. In our building, the kitchen GFIs are on a 20amp circuit / but accept standard plug prongs. (Perhaps in your kit. the same is true.)
What's the correct plug for 20Amp power cord?
I just bought a 20Amp JPS Labs PowerAC+ for a dedicated 20Amp line. It will be used with an Equitech 2Q line conditioner. It has the requisite 20Amp IEC connector but the plug is of the standard 15Amp type. My wall receptacle is of the dual configuration and is rated for 20Amps along with the in-wall wire and circuit breaker. Can I still use this pc and get 20Amps or should the wall plug necessarily have a horizontal and vertical prong to work as a 20Amp cord? Sorry for my ignorance.
Thanks,
Thanks,
- ...
- 5 posts total
- 5 posts total