Elrod EPS-3S versus EPS-3

I have both the EPS-3 and the EPS-3S in my system. I did not observe the so called "one-note" bass character. In fact, I thought that both cables had very good bass definition. As usual, observations are system dependent

By the way, the EPS-3S is markedly better than the EPS-3.

Sherod - Based on a great deal of experience with the Elrods and other cords, I don't believe the "one note bass" you heard was the "fault" of the EPS-3 Signature. I've had the opposite experience, and it seems that your experience once you used the "Hot Box" would confirm the problem was elsewhere in your AC. In any case, I just want to add that the 3 version of the Elrod cords can sound a little bloated, if used on relatively low current devices. The 2 versions are the cords designed for these.

Jfz, I appreciate your opinion. I see you don't have a virtual system posted, so I can't see where you are currently using an Elrod cord. Could you be more specific about your "extensive" use of the Elrods? Have you tried the 3 version on amps as well as front end? I have read that some people have had positive results with the 3 as well as the 2 on front end components. I'll admit that there is a possibility that I could have a potential AC problem which was helped by the Hot Box.

Hi Sherod,

I'm using Elrods on all my components, including line conditioners. I was one of the early users of the original cords. In fact, I even got to try an EPS-1. I kept on upgrading and trying different combinations. Yes, the 3 versions are designed for amps, and that's where I've used them. I tried a 3 on my preamp and my digital components, and found the bass was somewhat bloated or wooly. I hope this helps.