2. digital
  3. 1037415645

Polarity with SCD-1

I was just reading the review of the SCD-1 in Stereophile.
It states that there is a problem with the absolute polatity when running balanced that will need to be compensated for by reversing the speaker leads.

I have an all Krell/B&W system, with electronic crossover with quad wired speakers.

Is the above true and what does it mean? Has anybody out there dealt with this (problem)? Would pushing the phase button on the preamp solve the problem.

Thank you,
Richard
drrdiamond
drrdiamond OP
671 posts
 
Ivanj,
What does the 2nd half of your sentence mean?

Richard
anfield
32 posts
 
Quite a few of the recordings are out-of-phase anyway. The easiest thing to do is to use the phase inversion switch in your pre-amp, just toggle it and see whether you can hear a difference. I do that all the time. There is no need to change any cable connection.
Ag insider logo xs@2x
ivanj
35 posts
 
LAte night truncation of thought...what I mean is that the Sony is not a purely balanced differential design throughout. And the phase inversion switch won't make up for that.
gregm
3,409 posts
 
Drrd's talking about polarity, not phase -- right? In which cae, reversing the poles s/where (speakers say) does the trick. (Don't know about the scd-1, whenever I have listened someone else has been doing the setting up.)

If not, it seems that Ivanj is the bearer of bad news.
More to discover