To preamp or not to preamp?...that is the question

I recently bought a Resolution Audio Opus 21 cd player that has a built in analog volume control. I was prepared to keep my SF Line 3 but found the Opus 21 run direct much more transparent, pure, focused, and dynamic. The SF Line 3 had a little bit more body, but was noticeably less transparent, more diffuse, and the PRaT was greatly reduced. Some may prefer the Line 3's more relaxed presentation by comparison. My amp's sensitivity (.8v/47k ohm) and speaker's efficiency (91spl) are reasonably high. The Opus 21's output is rated at 2.5v SE and 5v XLR at 100ohm. I'm not sure what other factors are at play, but running direct in my system is more enjoyable.

I agree with Twl, an analog volume control is preferable to digital, as unless you run the digital volume with little or no attenuation (some Wadia models such as the 860 and 861 have an internal adjustment in the unit to enable you to do this more easily, I don't know if the 831 fits in that category) the sound seems to degrade. However, you should be sure that the analog volume control is as well-executed as the analog preamp you're replacing, which in your case will not be easy. Personally, having heard your system, I'd stand pat!

I tried it and gave up. Medium priced CD players (marantz and Denon) don't have high enough quality volume controls with enough steps. I was told that they can be modified but is it worth it? Secondly, the ones I experimented with only controlled volume for the analogue outputs. This meant that I was stuck with the internal DAC.

My solution was a Creek OBH-12 passive pre-amp until my budget allowed more. The Creek is totally transparent but the IR sensor tended to pick up too many stray signals and was always going louder/softer when I used a different remote. The other deal out there is an Audio Alchemy D/A with a built in volume. The quality is great. Try www.jeffsoundvalues.com or www.upscaleaudio.com to find these.

thanx guys...i was considering the ML 39 used...it fits right in my budget and i heard it does pretty good with volume control (in analog domain)...and Russ, you're not helping man!...lol...

There are pro's & con's to both approaches...
It depends upon the reactive output / input characteristics of your equipment, & how they interact with each other & with the cable interface. The only way to know what's REALLY going to happen is to experiment. My own situation: the player doesn't like longer cabling & it doesn't work well through a passive pre either, even with very short cabling. Works great with an active pre, but still wants a short cable. Your equipment is different so YMMV.