2. digital
  3. 1038105086

Question about using DVD player

My Pioneer PD-75 CD needs service to realign the laser. While it's gone, I thought I'd play my redbook CDs on my Pioneer 340 DVD player. But I need your help.

Instruction manual says it plays CDs (and DVD-video but not DVD-Audio). Manual says the player is capable of outputting digital signals with a sampling frequency of 96kHz PROVIDED "you have made connections to a component capable of processing this signal rate". I will be running the DVD player to my Audible Illusions preamp. What do I need to add to my system, if anything, to achieve the higher sampling rate? Will the audio improvement be worth the expense of this additional component? If not, I'll just use in the 48kHz mode until my CD player is repaired.
rockyboy
sol322
426 posts
 
Rockyboy:
How can you tell the laser requires realigning?
I´m having problems with my DVD and would like to know if this is the case with mine.
Thanks
Luis
rockyboy OP
335 posts
 
Luis,
My CDs were skipping badly. Even after using my Parasound CD lens cleaner and cleaning the CDs. Someone on the forum suggested I try using a can of compressed air to blow off dust, etc. on the laser. I did and it seems to have worked. So give it a try. You can buy the cans at most office supply stores. My wife already had one handy that she uses to clean her PC keyboard.
sol322
426 posts
 
Rockyboy:

Unfortunately in my case cleanin the lens and relubing the rails where the laser rides on didn´t fix the problem.
I´m getting high pitched notes that "follow" the music coming from the speakers.... so I'm not so lucky....
More to discover