Built your own speakers ?

I have built several systems with great success. Currently my system consists of two NHT 12" drivers for the subwoofers, two Dynaudio 5" (mid) and two Dynaudio 1" silk dome drivers. I use a 3 way electronic cross-over at 100 Hz and 4000 Hz. I am extremely pleased. The system compares favourably to anything I have heard thus far including Watt Puppys, Vandersteens, B&W 801's etc. Cross-over design can drive you nuts but Leap designed cross-overs work well but I believe better sound comes from the the electronic cross-over route. Total cost was less than $1500 not including amps and electonic cross-over. If you must use passive cross-over then I suggest you find a kit or already published design. The "Black Dahlia" design by Dick Olsher (a superb speaker) when built is a good example. Zalytron has many kits designed by Joe D'Appolitto (sp?). The magazine Speaker Builder is a good place to start should you want to go this route. One caveat--home made speakers don't have any re-sale value and the snobs who spend $5000 and up per speaker will dismiss your efforts as pure idiocy but if you want champagne sound on a root beer budget, its the only way to go.

I have built speaker kits from Madisound and even though they are very neat when you first complete building them, they never seem to sound quite right. This is the impression I've had about every kit built speaker I have heard. I had Source Technologies out of Conneticut build my last speakers ( Dynaudio satellites in an MTM configuration using all esotec drivers ). They did a great job of getting the crossover right and also did a fine job constructing the cabinets - proper internal bracing, sand filled bottoms, and thick cherry veneer. However, they were 5 months late on completion and the owner/designer was a horrible communicator. Needless to say I will never have speakers built for me by Source or anyone else for that matter. It simply is too much hassle and nobody seems to get the crossovers designed to perform like the designers and engineers do on a professional level. With all of the fantasic sounding speakers available today at reasonable prices, one should be able to be choose a make and model that will perform well, look great, and be reliable enough to last for some time; also, factory built speakers have better resale value. ( By the way, I spent about $2600.00 on mine. )

"Thorty"...Sorry to hear that all that effort was wasted. Doesn't discourage me the least bit, though, and I'm not just being stubborn. Your experience is extremely contrary to what the vast majority of speaker hobbyists experience. I've known several, and even know one guy (has the highest tech CNC equipment) that manufacturers many speakers' cabinets for the highend industry (they mostly are NOT made "in house", BTW.) And kits such as the Gemeni have been tested personally by none other than Joseph D'Appolito, and the matching and crossover design are in fact on par with commercially produced speakers at the retail level......................I'm tired of guys like you trying to discourage speaker hobbyists! Don't you realize that there would be NO HIGHEND speaker manufacturers anywhere, if they were all satisfied with what was available before they got started?

Carl, I am sorry if I was sounding like a speaker building "basher". I have had some bad experiences and though I have learned by them, I would really consider building again if I could tackle the project with better knowledge and patience concerning speaker design. Yes, Joseph D'Appolito has made substancial contributions and insight in regards to speaker design and building which I acknowledge and respect. I think what I like the least about some homebuilt speakers I have heard ( incorperating crossovers designed by LEAP programs mainly ) is the lack of soundstage depth and integration with frequencies through the spectrum. My biggest gripe with my previous and most recent project was time ( too long ) and money ( too much ). When I began the prospect of speaker building, I thought I could actually save a bundle and still get the end product I desired. In the end, I have a set of great speakers which, though costly, have provided great listening satifaction and an elegant appearance.

And by that, you are meaning that you aren't listening to any of the projects you built? Anyway, I don't mean to be overly touchy either, and don't mean to diminish your time and effort. It is indeed a terribly time consuming endeavor.