How to couple my monitors to stands???


Happy New Year, everybody!

I just acquired a pair of Aerial Acoustics Model 5 monitors and will be receiving a pair of Osiris 24" stands by UPS today. I need to know what I can do to keep my speakers FIRMLY planted on the stands.

Here's the problem...For those of you unfamiliar with the Aerial 5's, they have 3 brass "cones" (for lack of a better word) that screw into the bottom of the speakers - two in the back, one in the front. The front "cone" is height adjustable and tilts the speaker back to align the tweeter and woofer. Of course, if I just set the speakers on the stands, they'll be very unstable and could easily come sliding off the stands. I've got little kids in the house, so they've got to be solidly planted.

How critical is it that the speakers be sloped? I was wondering if there might be some kind of a "cup" (again, for lack of a better term) that I could couple to the stands (with blu-tak) that would keep the cones from sliding off the stands?? I got the idea from the cups that I had to buy for a chair with casters that I was using on hardwood floors.

Any help that you can provide will be GREATLY appreciated!

BTW - I know that Aerial offers a Sound Anchor stand for these speakers, but at $500 I couldn't pull the trigger. I got the Osiris for $299 shipped.
danheather
Blu-Tak is one solution, but for about one-tenth the price you can buy essentially the same stuff at Office Depot or Office Max. The product to look for is Elmer's "Tac 'n' Stik" reusable adhesive. I've used it for years (currently using it under my center speaker and rear surrounds) -- it works every bit as well as Blu Tak, and sells for 99 cents a package. The adhesive is scored into 5 sections, and four half-sections, each rolled into balls, are enough for each corner of the speaker.
Geez, Ed! I was looking for some FRIENDLY advice, not a rant about why I'm an idiot for not paying $500+ for a pair of stands. To put it into perspective, the difference in price was considerably more than $200 when you consider that the Osiris stands were $299 including shipping and with NO TAX. If I were to buy the Aerial (I mean, Sound Anchor) stands, I'd have to buy them in SF (tax rate = 8.5%), so my outlay would be $542.50...factor in gas (nope, it's not free) for another $20 and suddenly the difference is $262.50. I don't know about you, but to me that's A LOT of money. I'd much rather invest that money in software (music) than stands that are no better than the Osiris. Even better, I could use that money to take my family on a nice outing to the Monterey Bay Aquarium or something.

Also, I did shop around for the "factory" stands and there are no discounts to be had.

Finally, I'm not sure how you came to your position about the Sound Anchor stands being "far-better-made" than the Osiris. Merlin Music Systems used the Osiris as their "factory" stands. By most accounts, the Merlin TSMs are arguably "far-superior" to the Aerials in virtually every way. Even if you don't agree that they're better, you must confess that they're a fine speaker - one deserving of a very high quality stand.

I just received the stands from UPS last night and, while I didn't have time to set them up, I did get them unpacked and they're incredible...very massive and beautifully built. Can't wait to fill them with shot (the Sound Anchors are prefilled with sand - isn't that for playgrounds?) and get them setup using some of the methods recommended on this post.
Hey Dan.....To folow-up on the email I sent you regarding the Sound Anchor Stands I have.I didn't read all the comments in your thread but I did notice your frustration with one inparticular.As a person who has owned both the Osiris you have and the Sound Anchor for the Aerial 5 allow me to attest to the fact that both are excellent products.If your not familiar with Sound Anchor they are indeed among the finest makers of speaker stands,racks ect.....Craftsmanship and materials are all top notch......Good Luck!
Permit me to follow up with one more suggestion for mounting your Aerials.The tilt is critical to proper time alignment.If you look at the bottom of the speakers you will notice that in addition to the inserts for the three cones there are two other inserts for machine screws.These two are for bolting the speaker to the factory stand.What you can do to achieve this factory set-up with your Osiris is simply center the speaker on the top plate cones installed.This obviously raises the speaker off the plate so you can mark where the mounting inserts would align with the top plate,then simply drill the corresponding holes a little larger than the bolt size as they will angle slightly through the plate to connect up the speaker.Just make sure to buy a bolt long enough to go through the plate and up into the speaker.This is exactly how the dedicated Sound Anchor stands are set-up
Hey, sorry to rant, but really - buying a set of $2000+ speakers and skimping on stands seems like false economy to me. I have aerial 5s (among other speakers) and the factory stands cant' be beat. Great if the Osiris are nice, but they are not factory, no getting around that fact. Curiously enough, a pair of factory aerial 5 stands came up here on Agon within a day or so of your posting... for $250. And even if those are gone, I know an aerial dealer that would cut you a break, I think.

-Ed