2. speakers
  3. 1011280806

Simple B&W Nautilus 804 Question

I just purchased a used pair of B&W Nautilus 804 Speakers. I am in the process of unpacking them. The seller is not available to ask. The instructions mention a transit clamp in the back of the speakers with no other notations. Is that the large screw like metal thing protruding from behind the top Kevlar driver? If so, do I completely remove it, or do I just loosen it. Thanks in advance for your help.
bowbow
rlb61
782 posts
 
If you're referring ONLY to the black plastic cover plate with screw on the upper back of the speaker, remove it. Its function is to protect the portion of the midrange driver (which protrudes from the back) during transit.

Regards,

Randy
bowbow OP
123 posts
 
Still need more help. I have removed the large silver color screw, that is all. There is a big black plastic ring around where the screw went in. The manual sais the instructions are on the back of the speakers. Obviously removed. Must be when from the factory.
lev335
220 posts
 
Unscrew the screw and what ever comes off with it is supposed to be off.
delphinj4011
15 posts
 
Put the large silver piece back on its part of the midrange. That is how the driver is mounted. I'm surprised it didn't fall out.
kr4ef94
208 posts
 
The manual (for the 800) states that one should remove the cross-cut (philips driver) screw which is for transport. It say NOT to remove or adjust the slotted (flat driver) screw which tensions the midrange driver.
More to discover