Vandersteen 2Wq corner placement?


Hi,

I've read some great things about this sub, but due to aesthetic reasons there is really only one location that will work and it will be wedge into a 90" corner on the same wall the main speakers (ProAc 1.5's) are on.

Does anyone know if this location will work with the Vandy sub or will I get some real issues with it being in the corner? I only have room for the one sub.

If anyone has other sub recomendations for use in a corner and with the 1.5's, please let me know.

Thanks,

Phil
phil0618
I also have a pair of 2Wq matched to MG 3.6R. One of the subs is in a corner directly behind a speaker. The subs are properly intergrated and cannot be localized. I also have a V2W that is placed in the back of the room for HT.
I have a pair of 2Wqs, one in each corner just behind my mains. The 2Wq manual suggests if you are using just one 2Wq that it should be located somewhere in the plane behind the mains, especially if your mains roll off before 40hz. The higher this roll off occurs the leaner the mains will be due to the 6db high pass filter used with the 2Wq, and the more likely one 2Wq will be identifiable if used in a corner. As Bigtee said there are many adjustment possibilities with the 2Wq that may help to minimize this. You won't really know until you try. I had a Rel Stadium III prior to the 2Wqs. The Stadium III was very good in my setup, but it did not offload the mains, and it did not provide stereo bass (unless you buy two). My experience is similar to Bigtee's in that the 2Wqs outperformed the Rel, especially with the M5-HP filter. You can buy two 2Wq subs and a M5-HP filter for about the same price as one Rel Stadium III. While I think the Vandy is a better value, a Rel Strata may be a better option in your situation.