2. speakers
  3. 1073256962

Metal speakers. How are they?

I notice that aluminum and magnesium cones have become very common, including in some high quality systems. What's the story on these things? I am considering purchase of a speaker that has Seas 7-inch magnesium woofers, in MTM configuration.

These speakers will replace Dynaudio Gemini MTM speakers whose little 5" woofers are great, but just won't keep up with my three MG1.6 + SW front speakers. I have contemplated rear subwoofers, but there just is not space. The Dynaudios were used for many years as the high end of a biamped system, and they were fine for that purpose.
eldartford
eldartford OP
4,262 posts
 
Thanks for the good info. Seems as if the SEAS W18E001 is about as good as it gets.
slappy
903 posts
 
I agree with greg about the slight harshness, but all in all i think metal cones can make fantastic speakers

Regarding the horse-pucky reference, one of the things that has to be taken in consideration is weight and rigidity.
Maybe if you tolled the horse crap out real flat and fasioned it into a cone and used some sort of hardener to it, then maybe a horses but can be the source of sonic beauty! :)
dweller's avatar
dweller
3,785 posts
 
Slaps: Maybe mix a little beryllium with the pony's oats?
slappy
903 posts
 
Dweller, thats not a bad idea. Maybe a pinch of powdered ceramic as well
panny
99 posts
 
There are many great Metal Drivers out there.The problems with ringing have been addressed and the set I use now have no such artifacts.I heard of one designer that stated he could tell what the driver material was just by the sound.

I thought I use to until I received a new set of Metal Drivers for my NEARs which have eliminated the Metal artifact.

Wilsons are Metal ,atleast the Inverted Domes are and I use an Inverted Dome also. They need to be implemented right which is key to everthing in audio I think.

www.nearsota.com
More to discover