a couple of questions about maggies

does anyone know if the magnepan mg12 is set up to be bi-wired? i am actually looking for an amp to drive my paradigm studio 60v.2 speakers for a year or so that will also be good for when i upgrade to the magnepan mg12 speakers. i dislike brightness all together but also like a solid clean bass line. would a mccormack dna-1 do the trick for both speakers? or how about the b&k or rotel 200x2ch amps? any recommendations on a pre-amp that would also mate well with both speakers and the soon to be bought amp?

In answer to your first question, the stock MG12QR cannot be bi-wired. As far as amplification goes, I used a Bryston BP-20/3B-ST combo with great sucess. I would think the McCormack would be fine.

Have you listened to Magnepans before? The bass presentation is very good, but it is very different than most conventional speakers. I personally preferred using a sub with the MG12QR, and can recommend a ACI Titan LE.

Two points of interest...

1. I am using CarverPro ZR1600 amps with MG1.6, and the result is superb. The available power, 600 wpc, is ridiculous, and I am sure it is something that "comes with" high power (current delivery perhaps) and not the power itself that really makes these speakers shine. At only $840 these amps are a steal.

2. I have just modified my MG1.6 crossovers, using a 10AWG air coil inductor, and Hovland capacitors. I expected only improved sonic quality, and was surprised that the sensitivity (dB per watt) increased significantly. This might make the MG1.6 more suitable for relatively low powered tube amps. (I did slightly change the crossover design, using 3.0 mH and 21 mfd instead of 3.5 mH and 22 mfd).

I've had a pair of 12'2 for about seven months now. Been driving it with a Stan Warren modified Adcom gfa 5400 (125w @ 8ohm, 200w @ 4ohm) and a Quicksilver tubed linestage. At normal listening levels the sound is excellent; smooth yet detailed. However, when I really crank it up, the adcom struggles (especially mid-upper treble).

So, you may want to look at getting something that can put out more than 200w @ 4ohms. I thinking about getting Stan to modify a 5802 for me.

Keneallyfan
I have only heard them once hooked to high-end stuff at a dealer and was blown away by how different they sounded than any other speaker. I settled on the Paradigm 60v.2 because I got them for a steal. I'm getting ready to move and will be using Paradigm Studio 40v.3 in my new family room (just because of the room layout and wife factor). I will have a second sitting room upstairs and this were I will eventually put some Maggies. There is no need to have the same speakers in both listening rooms. I do have a HSU VT-2 sub that I will use with the Maggies if it mates well. So no, I have only heard the MG1.6 once but thought the sound was magical. I am looking for a good amp to use with the Paradigm 60s for awhile and then to use with Maggies in the future.