The future of preamps

I'm a bit confounded why it would be implicitly, and quite arrogantly assumed I'm not using my ears when stating the above; I most certainly base my findings on actual listening impressions, and there's nothing in the slightest anemic/thin/lean/unemotional or what else that robs my sonic experience from an organic, coherent, and effortless presentation through my setup without a hardware preamp. I have heard MANY setups, some of them extremely expensive (>$100,000), using hardware preamps (both solid state and tubes), and through a not insignificant number of these what has struck was: a malnourished, too soft presentation that furthermore lacked coherency and dynamic impact. I'm guessing this has less to do with the fact that hardware preamps were used here than the speakers used, and other combined factors. What I'm actually saying is also that the oftentimes prejudiced stance that 24-bit digital volume controls are marred by truncation effects is blown out of proportion, and that ACTUAL LISTENING has told me and my ears something very different. Perhaps there's much more in store for me with the addition of a hardware preamp, but until such (listening-)experience would tell me so I'm trusting my ears damn well enough to know that it sounds great without one.

I'm a bit confounded why it would be implicitly, and quite arrogantly assumed I'm not using my ears when stating the above; I most certainly base my findings on actual listening impressions

Phusis, I would guess that the reason is you have had a spat of bad luck, as your experience is one of the minority. A lot does depend on the preamp though and they are not all created equal! Some simply act as filters in the system. If you have been working with such preamps I would not doubt that you reasonably arrived at your conclusion.

Phusis,
I make the assumption we (or most) rely on what's heard to form an impression. As we are all different there'll be varying conclusions and choices made. My experience happened to be very similar to what Jon had written and I wanted to respond. You have your own experiences to share and certainly others can relate to you and your outcomes as well.

What I described has absolutely nothing to do with you preferences and the converse is true, they're completely independent of one another. We are just two people who happened to have different views. What I wrote about
the sound of passive-direct compared to good actives is simply what I
heard. I have no problem at all with your listening encounters/ comparisons
(how could I?), we both were expressing our opinions on an open forum. There's no rule that says we must agree with each other. You've recognized what sounds preferable to your ears and I've done the same. The ultimate result is we're happy with our individual choices.
Charles,

@ Atmasphere, Hi, Thankyou so much, It's hard to find something that may work with this crazy amp I have, I never told all of you here, I have the complete owners reference and more on my amp, all the specs that Almarg stated, I have in my hand now, and alot he did not list!, Ralph, The reference says this,,Dc protective circuitry- Full powered balanced amplifiers use unobtrusive direct current {D/c} protection circuitry that strips DC from the signal without corrupting sound reproduction. Full powered Balanced amplifiers feature direct coupled circuitry from input to output. This topology eliminates all coupling capacitors from the audio signal path. coupling capacitors block damaging DC but have sonic characteristics that corrupt sound reproduction., Useing A Tube Preamplifier,The high DC output of tube preamplifiers may exceed the DC protection circuitry of full powered balanced amplifiers. Excessive DC level in a signal can damage amplifiers, speakers, or both. The coupling capacitors in full powered balanced amplifiers must be engaged when useing a tube preamplifier, the none active coupling capacitors must be inserted into the signal path before you can use the Fpb amplifier with a tube preamplifier., ok, see what I am talking about, I do have to be careful, I do not want to use the coupling caps that will degrade my performance just to use a tube pre-amp, I do know they may make some that will work without going thru this, what is your thoughts on all this info?, It's an Honor to me that you have interest in tring to resolve some issues here for me, cheers.

Hi Jon2020, Didn't I buy a cable from you?, A Taralabs cobalt power cable, I was wondering if you are the same gentleman, I am quite happy with the sale if you are the gentleman that sold me the cable?, anyway, My assesment of running a source direct to amp is good, transparency and realism was quite spectacular!, However, I agree with you, I had a Krell 300I intergrated on a second system, I put the unit on the main system before I sold it to help finance buying the Tara zero gold, I did hear more information!, I was stunned to say the least, I am assuming this was because of the gain a pre-amp has?, thou the transparency was not matched or realism, It was quite enjoyable, now the thing is, can I possibly get both without a second morgage on the house?