Usher CP-6311 Tube Amp Recommendation


I know everyone has their own thoughts and ideas on any subject and I am probably opening up a "can of worms". I am looking for a tube amplifier recommendation to work well with my Usher CP-6311 speakers. Usher recommends using them with a solid state amp, but I am possibly looking to venture into the world of tubes. My current setup includes: Balanced Audio Technologies (BAT) VK-30 tube preamp, Acurus 100 X 3 solid state amp (remaining from my home theater setup), Thorens TD125 MKII turntable with SME 3009 arm, Acurus CD player, Usher CP-6311 two way speakers. I appreciate your suggestions. Thanks
epeabs

I'm sure Usher has a very good reason to not recommend using a tube amp, possibly large dips in the impedance from the nominal rating, severe phase angle, or both. If you want to try a tube amp, you should at least use a tube friendly speaker to get the best results.

Have you thought about trying different tubes in the preamp?
Sorry for a late reply to my post. Been on family vacation with minimal cell service. I haven't tried tube rolling in the BAT since I want to get away from my three channel Acurus amp and go dedicated two channel. Figured once I upgraded my amp, I would experiment further. I've read some decent reviews on the Usher 1.5 reference SS amp and am considering that as a possibility. My usher speakers were my first recent used purchase into the world of dedicated two channel so not looking to change those out at this time. Thank you for the inputs.
I sold my classe separates and went with the rogue Cronus magnum to power my usher cp-6381's and now my new usher mini dancer 2's. Plenty of power with the kt120 tubes. The 6381's were driven using the 8 ohm outputs and now I'm using the 4 ohm outputs for the md2's. Great integrated tube amp.