2. amps-preamps
  3. 1394129996

Tube Amp for Martin Logan Speakers

Hi, I love tube sound through my Martin Logan Aerius-i fronts and Cinema-i center. I currently have a Butler 5150 which is a hybrid, but it busted on me and would cost $700 to fix. I've had china stereo tube amps that were pretty good and gave true tube sound, but not enough drive for higher volumes. I live in condo, so not like I can blast music anyways but still. I got the Butler because I wanted 5 channel tube sound for home theatre (The piercing sound from my Denon 3801 receiver was not pleasant to my ears). It appears there are only three multi-channel tube amps around, from Mcintosh, Butler 5150, and Dared DV-6C. The latter two are hybrids, and the last one was one of the worst tube amps i've ever heard. I have no clue why 6Moons gave the Dared a 2010 award, but maybe it's because it produces only 65W.

So since multichannel tube amps are hard to come by, and they tend to be hybrid, I was thinking maybe it would be best to get three true tube monoblocks to power my fronts. Thing is I wonder if they will be underpowered for my speakers, and not sure which ones are decent for the price. Maybe China made ones would suffice, and they still go for pretty expensive price. I'm wondering if anybody knows of a decent powerful tube monoblock that is affordable, because I can't pay $3000 per block. or maybe best to just repair my Butler. Thing is, I'm not confident that it is reliable. The tubes are soldered in which is weird, and i've taken it to a couple repair guys who both said that the design is not good, because it's very tight inside and more susceptible to being fried from DC voltage areas. it's too sensitive.

Any suggestions for tube monoblocks, even if china made ones? the holy grail for me would be Mcintosh tube amp, but they are hard to come by. Thanks.

smurfmand70
georgehifi's avatar
georgehifi
10,312 posts
 
Atmasphere: George, take a take a look at the links on this page:

I have Ralph, and I stand by what I said, I have even put them on my system which definitely doesn't need them, and the sound took a big step backward.

They are sometimes a "recommendation" for OTL's as they allow them to drive speaker that would not otherwise be a good match for. Best off changing the amps or the speakers.

""They are a bandaid fix to allow an amp that has no chance of driving the speaker by it's self, to make it usable with that speaker."

Cheers George
sschmidt
19 posts
 
Hi,

I've had numerous ML's as well as other stats for 2-ch and HT. I use tube amps exclusively with stats. Back in the 90's, I had the Aerius. I found that the VAC PA 90 monoblocs were magic with them. Many VAC amps work well with stats. I saw a pair of VAC PA 90's on Agon a couple days ago. Kevin Hayes, the designer has King Sound speakers, a very difficult load, and uses his VAC phi 200s with them. Maybe consider a stereo unit now and add another later. Good luck.
sschmidt
19 posts
 
Hi,
I had many stats and tube amps through the years including four pairs of ML's. I had the Aerius-i in the 90s. I paired a VAC PA 90 with the Aerius. It was a magical combination. Since then I've used other VAC amps driving stats with great success. They're designed and built to do it. I saw a PA90 on Agon a couple days ago. Another thought may be to consider the VAC Phi200 stereo amp now and get a second one later - if needed. FWIW - Kevin Hayes, VAC AMPS president and designer uses the PHI 200 to drive King Sound stats. Good luck.
atmasphere's avatar
atmasphere
11,807 posts
 
George, you took the quote out of context- sounds like you didn't read the article to me.

Unsound, I have a number of friends in the industry that make transistor amps. When Steve's letter turned up, I asked them about this and their response (paraphrasing) was:
'Just because the amp can drive a lower impedance with more power is not the same as saying it is also sounding its best.'

Now there is no argument that supports your position that because the impedance of the load is lower, that this translates to
extend frequency response, improve the linearity of frequency response, and as you've already noted can increase dynamic range.

Of the latter point 'dynamic range' you are putting words in my mouth.

But given your response (and apparently also that of George) it does indeed appear that the both of you prefer to have your amplifier add some distortion. So in that regard we do indeed differ- I prefer a lack of distortion if possible.
mapman's avatar
mapman
22,203 posts
 
I'll agree that benign speaker impedance curves makes it easier to find an amp that is likely to sound really good with said speakers.

But lower and more challenging impedance curves are more the norm these days, and with just a little care, one can find many amps that are good matches. Class D amp technology pushes this truth even further than before, and makes smaller more efficient packages that perform well possible.

SO choose your approach wisely and listen to the results and there are multiple paths to happiness.

There are always so many types of distortion at play in any reproduction, that focusing on any particular type does not tell the whole story nor add much value IMHO.
More to discover