REL subwoofer with old McIntosh tube gear?

Try using the adapter on your Mc amplifier and be sure amp and sub are plugged into the same outlet.

You are trying to solve system hum with a sub? How does the thinking go?

I'm trying to get rid of a 60 cycle hum when the AMPS [emphasis added] are on...

More detail is needed. First, are you saying that you are using a pair of monoblock amps? Also, what model is/are the amp or amps, and the sub? And am I correctly interpreting that you are connecting the sub using its speaker-level inputs, and that the hum is emanating from the sub?

Also, some of the vintage McIntosh amps have both a "gnd" (ground) terminal and a "com" (common) terminal adjacent to their 4, 8, and 16 ohm output terminals. If that is the case here, which one of them are you connecting the REL's black wire to ("gnd" or "com"), and is there a jumper on the amp between those two terminals?

If both of those terminals are present but there is no jumper between them, adding a jumper may fix the problem. That possibility is reinforced by your statement that the two-prong adapter made the hum much louder.

Regards,
-- Al

Thanks. The Amps are Mc-60s and I've got the REL T-7 wired to the speaker outputs..8ohm/com. I tried jumpering to ground..no change.

The hum is pretty slight but definitely there only when the amps are on..

When connecting a single sub to two monoblock amps REL generally recommends connecting the sub's black (ground) wire to the chassis or other ground point of the preamp. The red and yellow wires would be connected as they apparently are presently, one of them to the 8 ohm tap of one amp and the other to the 8 ohm tap of the other amp.

I would NOT try that, however, without Gnd and Com being jumpered together on both amps. Connecting the black wire to preamp ground, or for that matter to Gnd on one of the amps, without the jumpers being in place would result in the sub seeing a floating input from each amp having no return path to the secondary of the output transformer. The result would probably be a huge hum.

The schematic appearing on the last two pages of the manual may help to clarify that.

Regards,
-- Al