Which REL subs for ProAc One SCs?

Thanks much for the replies guys. I'm so glad to hear that I may be able to still use the One SCs. I love their tonality and imaging. I'll start looking for a REL sub.

With your setups, you did not pass the lows to the monitors, just the subs? I can see this would put much less demand on the ProAcs.

I only listen to 2 channel music, jazz.

Jim

The REL "high level" connection via the Neutrik Speakon cable connects directly to the speaker terminals of your power amp for the most balanced implementation possible of the subwoofer. The Neutrik cable has three strands, yellow, red and black; the yellow and red connect to the positive terminals of your amp, the black is a ground that connects to a negative terminal. That's all you have to do before you start listening and tuning the dials on the REL. By all means plan to use this connection, not the "low level" RCA-type connections to the REL. It will come with a detailed manual explaining all this.

I use a REL Strata III with ProAc D30R.. My room is 15x 25 works great have the crossover at 34hz.. I've been considering a upgrade but it's down on the list after my PS Audio DirectStream Dac upgrade and my Auralic Aries..

I use two subs with my SC's, both are NHT SW2's, which have outboard amps. I have the subs on spiked amp stands, with cushioned auto wheel rings under the subs. How I came to that configuration is a long story, but they work very well. The only way you are going to know if two are better then one is to try them together. Purchase where you can get a return accommodation with full refund within 30 days. If one works, take the other back.