REL Gibralter G2 a good choice?


Hi all,

I've been planning to add a subwoofer to my system (see below) for quite some time now. I would like to augment my monitors and am looking for "musical" bass rather than the Home theater version.

The REL line of subwoofers seem like a good bet, primarily as they have Speaker level connections. This would mean the monitors would run full range and the REL picks up from around 45 Hz or so. I realize this doesn't lighten the load on my amp but has the benefit of not adding extra equipment to my system. I was also looking at JL audio but my understanding is they work best with an external crossover with High pass/Low pass filter set up and I'm not sure the added cost and work is worth it.

The top contender at this time is the REL Gibralter G2.

I would love to hear your thoughts/comments.

Thanks for reading!

Arjun

My system:
Vinly source: Rega RP6/Linn Adikt cart > Lejonklou Kinki 3 phono
Digital: Macbook Pro > Centrance DACMini CX

Amp: Simaudio 250i (50 W per channel)

Devore Fidelity Gibbon 3XL (45 Hz - 40 KHz, 90dB/W/M, 8ohm)
arjundas
Thank you all for your input. I apologize for the delay in my reply but it took quite a while for my question to be posted and I initially thought it hadn't gone through.

Anyways, I agree the G2 from a financial standpoint is overkill for the system but I was looking to pick up a used one. The ease of integration and ability to match the speed of my Devores (woofer is only 5") is the key for me. My understanding is that a 10" driver paired with the power the G2 comes with should make that possible. Another option is to get two R-218 which is also a sealed box wih 10" driver but it has nowhere the same power. Any thoughts?

Vladimir, thanks for the tip re: S series, will definitely look into it.

Thanks,
Arjun
Post removed 
Thanks for your reply Bob. The Devores despite having only a 5" driver are rated as 45Hz - 40 KHz. I realize that "real world" numbers may differ. I plan to measure them in my listening room soon.

Arjun
The Devores go down to 45hz. Set the cross over on the REL at or about 45hz. For example my Rockport Aviors go down to 28hz and I have set the crossover on the G1 to 30 hz. It doesn't hurt to be able to do this with a REL remote incl phase and volume setting.
Best
Pradeep