Re: Herron VTPH-1, That phono stage can handle either MM or MC, but the changes need to be made at the factory. IIRC, the VTPH-1mm is pure tube while the MC version uses quiet FETs to amplify the low level MC signal.
Symptoms of a compliance mismatch (low compliance cart on a low-mass arm) usually include uneven frequency response and a lack of bass. Can also include blunted transients.
The higher mass arm is needed to keep the cartridge body in one place while the cantilever and stylus track through the groove. Insufficient mass allows the cartridge to vibrate and move with the cantilever rather than the cantilever transmitting the signal to the coils.
Adding weight via an arm wrap may help increase effective mass and damping. There are other considerations such as bearing load and counterweight mass that might not work well with the new arm mass.
All that said, there are some very nice MM and MI carts that would be a good match to a low mass arm.
Symptoms of a compliance mismatch (low compliance cart on a low-mass arm) usually include uneven frequency response and a lack of bass. Can also include blunted transients.
The higher mass arm is needed to keep the cartridge body in one place while the cantilever and stylus track through the groove. Insufficient mass allows the cartridge to vibrate and move with the cantilever rather than the cantilever transmitting the signal to the coils.
Adding weight via an arm wrap may help increase effective mass and damping. There are other considerations such as bearing load and counterweight mass that might not work well with the new arm mass.
All that said, there are some very nice MM and MI carts that would be a good match to a low mass arm.