Kenwood L07D antiskating

KB61
This is a great table to have in anyone's collection and if yours is in good
operating condition the sonic potential of this table is enormous,
My Lo7d has a second arm the Fidelity research 64s with a Lyra Olympus
cartridge , my all time preference, however this combination is only
reserved when I want best enjoyment from music.
The original kenwood arm I think Lewm is correct about changing the wire
something I have not got around doing , I did use some mm cartridges in it
and the performance was ok. With what you have I would put my efforts
into a better arm,...
To further enhance your LO7D to another level I recently purchased
Symposium Roller blocks super ball 3s double stack them under the LO7D
The science behind these roller blocks is immediately realized, yes there is
enormous potential with your LO7D.

Dear In_shore, You are certainly entitled to do what you want, but I would never put Rollerblocks under any turntable. I don't want movement of the chassis in the horizontal plane.

I'm with Lewn....this is a great way to ruin the sound of this table.

Lewm and Stringreen
I know and I fully agree not wanting any movement what so ever ,further
I was highly sceptical and no way did I want anything to do with this at first.

With the platter spinning the table is moving,that was my first thought that it would jiggle ,not the case.
With a gentle touch a wobble is ever so slight queuing the arm of course ,once done the table settles very quickly and you really have to watch for any movement but it's there.
No doubt this was done before with bad results and I could easily understand some of the problems why.

If there were the slightest detriment in sound or risk with such an expensive cartridge I wouldn't do it .And finally What! an upgrade for $800.00
Kudos to Symposium

I don't think there is any risk to your cartridge. I am concerned that you have a rotating mass, in the form of the platter assembly. If that mass is not perfectly centered with respect to the rollerblocks, then I wonder if there is a tendency for the entire tt to want to counter-rotate in a circular fashion, with the true center of mass as its center. The entire plinth is designed and built to prevent that, and here we add a modification that defeats the purpose. I doubt it's a big problem, and since I am only theorizing, I could be wrong, and it may be no problem at all.