Cartridge or cable upgrade


Hey all,

Equipment is as follows:

Pro-ject 5.1SE tt
Sumiko Blue Point cartridge
LSA Statement Integrated (MM/hi-output MC phono stage)
Reference 3A de Capo BE monitors
Monster Cable Interlink 2 Insulated IC for phono connect

Should I upgrade the cable or the cartridge first?

I'm thinking of the Dynavector 10x5 ($450) for the cartridge, or Anticable Reference 3.2 for the cables ($300)

Any advice in those price ranges?

Thank you in advance,

Simao
128x128simao
Get a new 10x5 and buy a good used pair of IC's like an AQ Jaguar for 100-150. They sound way better than anti cables and have the DBS system which is a good choice for TT's because they stay broken in with little use.
Again, agreed with both Mattmiller and Zd542,
There are many cables out there better than the antis at a more affordable price.
You all rock. Thank you for all the advice and guidance. Some further questions:

1. How thick a mat should I get if I go the Herbie Mat route?

2. Yes, the table is probably the weaker link in the system, but at this stage I'm not sure how invested I want to get in the analog side of things. However, if I do pursue it, what's a good table that would be a step up from the 5.1? Figure ~$1000 used.
"Yes, the table is probably the weaker link in the system, but at this stage I'm not sure how invested I want to get in the analog side of things."

Your TT is more than adequate to get you started in vinyl. You'll see that upgrading is very different for digital and analog. With digital, you upgrade to something better sounding, but after that, you feel the need to upgrade again. And again after that. With vinyl, you can think of upgrades and improvements, but are not so compelled to do them like digital. Its much easier to enjoy what you currently have, even though there are improvements to be had.
Excellent advice, Zd. I've never really been unhappy with my table and researched a bunch of them heavily before deciding on the Pro-ject. One dealer clicked his tongue, shook his head, and insisted that I HAD to buy one of his Well Tempered tt's if I wanted to get ANY fidelity in the analog world, but the $1300 was out of my reach, especially sans cartridge.

That's kind of why I wanted to change the small things - cables, low-priced cartridges, even a heavier platter?