Is there anyone who came back from tubes to SS?

when i went to my local high end shop they use to kid me that i could detect something in the krell force. i had a krell 300 s krc3 md 20 and studio. i had used tubes before with great results. but after reading high end magazines. ss is as good as tubes. well i spoke with krell this was confermed . i still like ss but tubes take me to the real thing. if you ever hear good tubes and listen to your ear not a magizine you will never go back. sounds like bob needs to hear my system.

To answer to Steveaudio,
I am using an ultimate custom built dual-mono DACT preamplifier that have both: active and passive sections for each channel, stepped volume attenuators for each channel. I can use it as passive and I can use a switch for extra gain. It's battery powered for each channel currently, but I'm about to get DACT dual power supply. It's all solid state -- gain section and power. On the analogue end I have AR PH3 hybrid phono and that is why I need some extra feedback(not necessarily gain) from preamplification to stabilize the phono output.
So switching to tubes will(I assume) bring me a nice "blend"
I think that preamp will stay with me for a long time since I've invested my time and bucks to create it and it sings. If I use digital end I turn the gain section off and use it as passive.

I like a solid state amp tube preamp combo
You get the advantage of the warmth of tubes, tube rolling to paly around and preamp tubes are not as costly as power amp tubes. Also I can leave my Audio Research D200 on for extended periods of time where it really breaks in nicely and not have to worry about short tube life.

tom

On an absolute basis, if I had nothing to do but sit between my speakers and listen critically constantly, I prefer the sound of tubes. There is nothing better.
On a practical basis, I no longer have this kind of time, and tube equipment requires more space, ventilation and maintenance than I care to deal with. Thus, I have just switched to solid state. It was not an easy choice, but I am slowing getting used to living with an Audio Refinement Complete.

I recently moved out of my Copland CTA-402 tube integrated into a Plinius SA-100mkII and C-J PV11 and couldn't happier. Yes, there is some hiss if you put your ear to the drivers, but when music is introduced, it's wonderful! The ProAc 2.5s are happy and have all the power the need to pull the depth and detail out of the source material; analog or digital. Yes, tube rolling is fun too! I contacted the tube gurus out in California and took their recommendation (not their pricy product) to swap the stock CJ tube set. I am using Tele 12ax7s and RCA Cleartop 12au7s. I am searching for GE 5 Star 5751s to replace the 12ax7s and to one stock 5751. I just acquired some Mullard 12au7s and am anxious to try these in place of the RCAs.
Your decision should be based on the efficiency of your speakers, room size, music preference and budget. You're gonna get a lot more SS than tube amp for you $$. But, I personally would never have a totally SS system. This is the second SS/tube pre combo I have had; the 1st being the Aragon 4004mkII and CJ PV8 driving Maggie MGb's. The CJ replaced a NAD pre-amp, the result was stunning.