Whose got best class D at this point?

Why not D for horns?

Despite someone "best guess" from my own experience JRDG Concerto + Tannoy 'Prestige' Glenair is an excellent combination=)...of course this is just my opinion...

i will respectfully disagree with the statement that insulated, (taken to mean shielded) ICs impart noise. No offense intended, but only a/b the same cable with and without the insulation could show that. Though, I do not doubt that you found Cardas and the other to be noisey. Shielding can
make for a blacker background, sending detail more forward (and that may be where the cable's hash existed); though some
will say it swallows the air a bit. The air (when it comes to cheap sounding cables) can be heard as noise itself. Your example of Shunyata
almost supports this, only in that you are removing the noise in the PC bia the field of the shielding. It must have been other factors that were
common to those two mentioned, that lead to your conclusion as it seems to be inopposition to the larger body of evidence regarding shielded vs
non-shielded cables. though again, I do not imply that the
observations were not actual.
You may find this humorous, that there are manu's claiming that "twisted pair" cables (a lesser form of reducing RF andEMI) so they use "Shielding"
to insulate (though shielding makes more of a sonic difference) that must be due to their using extremely thin wire and cheap connectors. Forgive me
if however, I have misinterpreted your meaning.

Spiro, There is absolutely no doubt in anyone's mind who have heard my
system concur IC insulation invariably imparts static into the signal. Bare
wire, or wire with just a thin sprayed coating don't. That is my system. The
Cardas was simply unlistenable. The Jena merely faired better.

Well shielded PCs are needed to defeat RFI emitted by the module. This RFI
will enter all other components that are not protected from it.

On the dielectric caused distortion, this may not be evident on some speaker
systems. If the preamp has excellent transparency as a great class D amp, a
very fine driver will pass the noise on. You can bank on it.

Great to see this post really had some legs.Still haven't made choice but seems like PS,Bel canto and from what i read hear Channel Island might be good switch for me.ut if I saty with high sensitivity I think that what I read from 6moons about the Redwine 30 or 70 mono's would be great.For $1500 more the 30 watt than the mono 70's at twice the price.If I get say a B&W Nautilus or other speaker that really needs the grunt they would be out.But again glad to see this thread has gotten soem liage from folks so you all must be interested and putting "Class D into the serch.Along with possibilities like expensive TacT and much more reasonable DEQX it's very "De Jure"
Cheers
Chazz

Okay, yes indeed! You are absolutely right. Air is the best insulator, teflon materials are next, but polypropes can be quite nasty. Shielding and insulating are not the same. Shielding is an insulation. I mistook your use of terms. I agree as my system shows what you describe regarding insulation. I find loose teflon to be nicer than the enamels I've tried, even light acrylics. Best regards. This thread has my mouth watering to hear the Red Wine unit.