2. amps-preamps
  3. 1174651503

HELP My whole system all powers up but NO SOUND

Good morning everyone!!
Last night when i came home,my first thing in my mind is to listen to my system.So,i power up everything and when it's all warmed up ,i start playing my cd and heard nothing.I checked all the fuse and looks all good and no sign of burned fuse?BTW,my system is set up for "BIAMPING ".Tube monoblock driving the upper panel of my speaker (Martin Logan/Aerius) and a solid state amp to power the bottom side ( woofer ).As i said it's all power up but not getting any sound at all in my ML.I did connected another speaker and no sound still.What the heck is happening in my system? Btw,i did even checked the preamp fuse and it looks good and ofcourse i can see it powers up or light's on. I am thinking to open it up last night to check my 12ax7 tubes. is it possible it will be my preamp tubes??
Or the problem will be in the pre-amp??REmember both tube amps and solid state amps power are all ON and lights ON but still not getting any sound.I am at work right now and thinking a lot what really happened? I need all of your input and information so when i reach home hopefully i will enjoy my Friday night.Thank you all very much in advance!
pescolar
pescolar OP
128 posts
 
Good evening fellow Audogoner's.
Just to let you know that i've just solved the problems.
I did open the preamp cover and tested the 2 6sn7 tubes and found out that the other one is totally dead and the other one was tested very low and replaced both with my spare tubes.And the out come was very succesful.Now the sound of music is back and i am very happy.
I WOULD LIKE TO THANK YOU ALL FOR THE VERY HELPFUL TIPS AND INPUTS.
pawlowski6132
592 posts
 
How did you test the tubes?
kowkow
11 posts
 
just curious, how do u "test" the tubes apart form looking at it?
pescolar OP
128 posts
 
Hello guys,
I do tested my tubes from a Jackson 648A tube tester that i acquired from a retired electrician who tought me how to used it.I got this tube tester last year and i even sold some few tubes NOS tubes that came from the same guy.
Pawlowski6132,
I am enjoying the amps that i bought from you and also to let you know that new output tubes when bias in this amp can go up to 170 ma with out blowing fuse although the manual required is 175 ma.As you mentioned Cary tech says 150 ma.You are blowing those fuse just because the output tubes before was already weak and i wonder why you can't go no more than 135 ma.The only thing since i owned my preamp i never checked the 6sn7 tubes which was the cause of having no sound.Cary tech told me to check those tubes.
Btw,i am using the Cary SLM-100 monoblocks to drive my ML panels and a solid state to drive the woofer.Since i did the biamping in my system,now i am really enjoying the sound of my speaker and may be try VRjr later.Did you sell yours?
AGAIN I DO THANK YOU ALL FOR YOUR HELP.
More to discover